Power supply checks and visual inspection of equipment for damage, corrosion and other defects; marking and identification on checks on devices. Elimination of revealed defects and conducting a follow-up visual inspection as required. Completing check sheets, conducting office reviews of the check sheets in Tengizchevroil Future Growth Project (FGP) – Wellhead Pressure Management Project (WPMP) Completion Management System (CMS). Developing I/E failure scenario Work Packs.

Processed I/E maintenance work orders. Planned steps for requested task in the work orders for the disciplines, estimated manhours and manpower. As an I/E Maintenance Specialist of our department I took part in online meetings with maintenance and operations personnel on a daily and weekly basis and liaised with other departments’ personnel to ensure a productive work schedule using ORACLE JD Edwards. Selected materials in TCO JDE E1 Web Procurement Reporting Support software; in case of unavailability of any material it was purchased by Material Coordinators via a direct order. After finding alternatives of the missing material in the project warehouses for direct purchase, I verified the acceptability of the proposed material for direct purchase from the manufacturer.

Supervised SK contractor’s instrumentation preservation works. Supervised the quality and terms of preservation of instrumentation equipment, as well as the provision of appropriate storage conditions and at the entrusted area. Supervised and guided the daily activities of instrumentation equipment preservation. Ensured the implementation of an effective storage and preservation program for instrumentation equipment to prevent damage, rework and associated costs, and to avoid problems with guaranteed liabilities and costs associated with improper storage practices. Took actions for primary and continuous preservation in accordance with the manufacturer's requirements, providing the team with all the resources and materials necessary to perform the work. In case of absence of the manufacturer's requirement when receiving instrumentation equipment, carried out primary and continuous preservation according to the "Instrumentation Equipment Preservation Instructions". Conducted scheduled audits on the quality of instrumentation equipment storage at the Third Generation Plant (3GP). Participated in the preparation of the scopes of work and supervised the execution process.

Supervised equipment and materials preservation works at all TCO warehouses, IBMOA area throughout the entire phase of being in the warehouse. Carried out permanent preservation of inventory items. Supervised and guided the daily activities of materials and equipment preservation. Ensured the implementation of an effective storage and preservation program for instrumentation equipment to prevent damage, rework and associated costs, and to avoid problems with guaranteed liabilities and costs associated with improper storage practices. Guided by the manufacturers' requirements for preservation to clearly define and fulfill the requirements.

Planned, evaluated, organized and supervised the quality and terms of the materials preservation, as well as ensured appropriate storage conditions at the “Off-Plot Facilities (Gathering)". Supervised the process of materials and equipment preservation before the equipment was handed over to the commissioning team. Carried out permanent preservation of inventory items. Supervised and guided the daily activities of materials and equipment preservation. Took actions for primary and continuous preservation in accordance with the manufacturer's requirements, providing the team with all the resources and materials necessary to perform the work. In case of absence of the manufacturer's requirement when receiving instrumentation equipment, carried out primary and continuous preservation according to the "Equipment Preservation Instructions". Conducted scheduled audits on the quality of equipment storage at the entrusted area. Participated in the preparation of the scopes of work process and supervised the execution process.

Supervision of contractors’ electrical works, according to project documentation and project drawings. Reviewed the design and work documentation. Participated in the third parties walkdowns, compiled the final punch lists, signed acts of works completed. Checked work permits. Executed the as-built documentation according to the procedures. Compliance and fulfillment of the company’s HSE requirements. Staff development through the provision of information. Took actions in case of violations of rules or procedures by other persons. Compliance with working hours, participation in meetings required in the project.

Turnaround (shutdown). Actively participated in KPO facility turnaround at GP-2 area. Conducted I&C (pressure transmitters, temperature transmitters, flow meters, etc.) functional testing. Instrument replacement and troubleshooting.

Supervised a team of 10-15 electricians and technical staff. Supervised installation of electrical equipment, pulling and laying of power and instrument cables into the cable trenches and trays. Installation of fire and gas detection systems, control boards, etc. in Tengiz RV (Rotational Village), Water Treatment Facilities. In October 2016, I was transferred to Prorva Project (Port for the delivery of cargos by sea for FGP project).

Providing the enterprise with energy resources (gas, water, electricity). Scheduled repairs of power equipment. Conclusion of contracts on the wholesale electricity market (KEGOC, T.I. Batyrov ZhGRES JSC). Submission of daily requests for electricity in the BRE system. Carrying out scheduled maintenance of power energy equipment (GPP 110/6, 6kV switchgear, Furnace transformers up to 8000kVA, TM 1000/6). Delivery of stat reports. Ordering of materials. Write-off of commodity and material values. Start-up and management of a new compressor section. Organisation of boiler room operation.

Maintenance of instrumentation on HVAC (Heating, ventilation and air conditioning) units. Worked as an HVAC operator at Karabatan refinery. Start-up of HVAC system once it was handed over to operation.

Turnaround (shutdown). Actively participated in KPO facility turnaround at GP-2 area. Conducted I&C (pressure, temperature transmitters, flow meters, etc.) functional testing. Instrument replacement and troubleshooting.

HVAC (Heating, Ventilation and Air Conditioning) system instrumentation maintenance. I have experience working with temperature controllers (SIEMENS RLU-232.236). Measurements of ventilation unit efficiency, pressure measurement of supply and exhaust flows. I performed ventilation unit efficiency measurement using TESTO instrument. I developed passports for ventilation units according to industrial sanitation norms.

Agip KCO-North Caspian Operating Company’s contractor. Kashagan-Karabatan Ground Facilities Project. Installation of cable routes, unrolling of power cables, connection of power equipment. Laying of cable routes, unwinding of power cables, connection of power equipment. Installation of cable trays, installation and connection of power cabinets. Connection of lighting boxes and sockets, installation of lighting devices. Reading of schemes.

The project of the second generation SGP (Second Generation Project). I was involved in commissioning of fire and gas detection system. Experienced in HART COMMUNICATOR. Calibrated gas detection sensors such as NGT (Dragger, Politron), NGC (Methane Detection Draggers), etc.

Contractor company "Tengizchevroil". Pre-commissioning works on the project SGP (Second Generation Plant) and SGI (Second Gas Injection). Adjustment and verification of protection settings on multifunctional digital protection relays of ‘ALSTOM’, ‘Schneider Electric’, ‘ABB’, ‘Merlin Gerin’, ‘Multiline’, ‘Sepam’, ‘Micom’ brands. High-voltage testing and measurement of 10/35 kV substation equipment. Testing of power electrical equipment, including power transformers, two-winding and three-winding transformers, oil circuit breakers, arc suppression coils, voltage transformers, current transformers, switchgear cables of various types and modifications, measurement of parameters of low-voltage circuits, insulation resistance (IR) testing, measurement of ground loop resistance. Work with technical documentation, schemes and drawings, filling in test reports.

After graduating from college, I was employed to the position of "High-Voltage Equipment Repair Electrician" in the above-mentioned enterprise, literally six months later I was transferred to the ETL (Electrical Technical Laboratory) to the position of "Relay Protection Repair Electrician». I was engaged in the identification and troubleshooting of relay protection, adjusting relay protection setpoints, measurement circuits tests, taking VAC (volt-ampere characteristics) to check the operability of current transformers. Checks and functional measurements of the operating parameters of high-voltage power transformers. High voltage testing of main and auxiliary PPE.