-Engineers to support Walk Down Engineer in organizing walk downs based on -Contractor MC Notifications and project schedule.& Recording all identified punch items during Walk Downs. Summary -Supporting MCPlus team by providing approved Final Construction Punch List to make sure the final punch list items and their status are accurate in the MCPlus system. -Ensuring that relevant punch lists of the Final Construction are available along with other punch list requirements as noted in the Punch List procedure. -Participating in a pre-walk down meeting to ensure all participants understand the punch list requirements as detailed in the Punch List procedure. -Participating in a post walk down meeting following the completion of the walk down to ensure all identified items are finalized, registered and categorized in accordance with the Punch List procedure -Participating in Contractor weekly meetings to update Construction and -Contractor teams on the status of punch list clearing in support of Mechanical Completions -Implementing knowledge of E&I procedures and standards -Conducting daily rounds of sub-systems and resolving disputes according to specification -Applying skills and knowledge of drawings of related positions: HVAC, as well as CSA and Mechanical

- inspection and approval of welding and NDT procedures; - control the performance of welding qualification testing and approval of welding procedures as well as welder’s qualification tests, including destructive and nondestructive tests; - checkup of welder and welder personnel’s qualified certificates; - control the performance of welding works in accordance with contract, procedures and specifications’ requirements approved by the Client; - control the usage and storage of welding materials; - observation over the usage of welding materials, required for the work performance; - visual inspection of weld joints; - control, inspection and checking the record of welding quality, maintaining the statistics and report preparation related to the welding; - preparing the welding procedure specification; - conduct hydraulic and pneumatic testing of pipelines; - tightening of bolt connections.

Following welding & mechanical activities. Weld Consumable Control. Job Planning/Follow-up, Preparing daily Work-Allocation Plans with routine inspection schedules for various Service Class as per Client’s Quality Manual & Standards Method Procedures. NDT offerings, Tracing & attending X-Ray/U.T defects & repair in accordance with acceptance criteria. Arrangement & Follow-up of Preheat, Post heat & Stress-Relieving activities Preparation of history sheets & reports, updating daily records & complete documentation as per project requirement standards. Submission of documented records & positive periodic progress reports at different stages as per Client’s requirement . Well versed with Piping Isometrics, Structural Drawings & existing Weld symbols. Arrange SEQ, ITP & itc. Excelent User of MaxTrax

Prefabrication & NDT Testing of spools. API 598 Valve inspection and testing. Completion documentation as per project specification

Job Planning/Follow-up, Preparing daily Work-Allocation Plans Folowing Method of Statement & NDT offerings, defects & repair in accordance with acceptance criteria. Arrangement & Follow-up of Preheat, Post heat & Stress-Relieving activities. Co-ordination in conducting Hydro/Pneumatic Tests for pipelines & other pressure related equipments. Preparation of history sheets & reports, updating daily records & complete documentation as per ISO standards. Submission of documented records & positive periodic progress reports at different stages as per Client’s requirement. Well versed with Piping Isometrics, Structural Drawings & existing Weld symbols

To produce document cycle time while integrating the document control process with Engineering, QA/ QC, Materials, Construction, Project Planning and Control, Purchasing, and Regulatory functions To produce major cost benefits by ensuring documents are available when needed and by freeing up engineers to do engineering work Submit document and upload to POL(Project On Line) To provide tracking of a document from creation to archiving or destruction. To ensure that the correct design revisions, designs standards, codes/regulations, test and specification requirements are available at the current, and past, revision levels when needed Accountable for project documentation delivery to KPJV Company’s Develop and coordinate process for preparation, scanning, filing and compilation of letters, minutes, memos, reports, and plans, and the use of Documentum or other document management system

Responsibilities: Providing inspection on the Facility Field as per Project Specification. Valve Testing and Installing. Verifying Flange Face’s and Bolting

Responsibilities: General Foreman for 20 teams of Pipe workers (pipe fitters, helpers and welders) involved in the montage of equipments and erection activities for all pipelines and technological routes - Coordinate work teams directly in order to maintain high standards of performance, quality and safety - Motivate workers to attain the product on schedules. - Monitoring progress and distribution of daily tasks, necessary tools and materials needed, with particular emphasis on compliance with specific safety rules and quality standards, ensuring the necessary logistics for each team of work. - Highlighting and solving of any technical or organizational problems at the team level in terms of location and setting priorities in the works execution under direct supervision of the site manager. - Providing technical assistance for ongoing work at all subordinate teams. - Analysis of the risk assessment. Daily briefing. Performance of works on the procedure for manual and automatic welding. Responsibility for Safety & Quality

Conduct a visual inspection in the field of electrical/instrument activities. Preparation of daily surveillance reports (DSR) with clearly mentioned discrepancies verified by visual and detail inspection • Review of contractor EIT documents (ITP, Checklists) • Material receiving inspections for transformers, cable trays, cable drums, splicing and termination kits, cable glands, all types of instruments, fire gas detection systems etc. according to the project specification, standards & purchase orders; • Work with the site inspection request (SIR) from the contractor: - inspection of installation of cable trays as per the project specification and relevant drawings; - inspection of the laying all types of cables in trenches and in the cable trays as per the project specification and relevant drawings; - inspection of installation all types of junction boxes as per the project specification and relevant drawings; - inspection of installation electrical distribution boards & marshalling cabinets as per the project specification and relevant drawings; - inspection of termination all types of cables as per the project specification and relevant drawings; - inspection of installation all types of instruments as per the project specification and relevant drawings; - inspection of installation lighting system as per the project specification and relevant drawings; - inspection of installation HVAC cables, distribution boards, instruments, valves etc. as per the project specification and relevant drawings; - inspection of earthing system installation as per the project specification and relevant drawings; - inspection of termination and splicing HV & LV cables as per as per manufacturer manual and project requirements

Performing daily inspections with the support of E/I technicians; Collecting the inspection results into the inspection record sheet; Activating the punch list intervention in case of negative inspection results; Performing punch list verification inspection after remedial actions done by punch list team Ex inspector E&I (Hazardous area QA/QC, Compex certified) Responsibility for the EX Electrical and Instrumentation Inspections, making sure that the integrity of all the Electrical and Instrumentation circuits and equipment conform to the relevant standards and regulations within the hazardous areas of the oil and gas sector, including maintenance and repair of all non-conforming punch list items. Detailed inspection of all hazardous area equipment. Verification of installed equipment’s conformance to ATEX certificates. Submits detailed report of Punches to Supervisor. Leads Technicians in clearing punches. Accepts and signs off ATEX Certified Equipment ITRs

Troubleshooting equipment’s reactors , Refrigerating systems, heat exchangers and piping components. Organization and selection of tools. Compliance with safety rules and procedures the works. Experienced user of hydraulic and manual tools for tightening bolted flange connections Hitorque and Norbar eq. .

• Flange groove. • Flange connections. • The organization works at the request of customers. • The inspection of the work done. . Reviews Engineering and Construction packages and coordinates the inspection and maintenance of all piping system in accordance with the piping system program during commissioning, start-up and operation. Supervising the Flange Management activity for critical joints, this includes checking and machining the flange faces, requesting materials, installing the gaskets and valves, torque and bolting as per procedure. Preparing the tags for the critical joints. Coordinating with Agip QC for RFI submitting and inspection. Reporting to the section Engineer. Preparing the daily progress report. Conducting Tool Box Talks for the crew. Organize action under the safety rules and regulations. Performs isometric checking to ensure the correct materials used for construction. Checks the isometric sheets ,P&ID equipment layout and piping material specification. Checks the physical data sheets assigned API,ASME,ASTM standards and vendor catalogs for consistency of validations to ensure the correct usage of correct dimension. Verification of construction completion as well as coordination, scheduling and execution of the commissioning program in accordance with the Project Completion Work Plan. Conduct Mechanical/Piping systems/sub-system packages walk downs together with AGIP-KCO HUC-UP Completion Team and generate Punch lists. Reviewing engineering drawings P&ID’s, D&ID’s and specifications requirements to ensure adequate provisions have been made for testing, flushing, Steam blowing, cleaning and rotating equipment turning, Oil systems circulated flushing, Grease filling and Initial test run other pre-commissioning/commissioning functions. Maintain commissioning and start-up records. Utilize the safety tagging and lockout procedure/process. Assist in the planning, scheduling and performance of equipment during the commissioning and start-up. Work closely with AGIP-KCO HUC UP on-site personnel’s and completion representatives engaged in pre-commissioning and troubleshooting activities

• Flange connections. • The organization works at the request of customers. • A report on the meetings and interviews with customers. • Preparation of defective statements in flanged joints to test the design - budget documentation. • The inspection of the work done.

• Daily reports of preparation. • Drawing up of reports on welding and flange connections. • Distribution of documents and drawings on sites. Arrange and translating all site progress reports of Construction & QA/QC Dept. Filling up DWR (daily welding reports), MRF (material request form). Supervising the installation of the Flare area. Supervising the pumps and Compressor alignment. Reporting to the section Engineer. Preparing the daily progress report. Conducting Tool Box Talks for the crew. Control all permits issuing for site work including the required attachments (Risk assessment, Method statement, Rescue Plan.). Control all extra works at site with preparation for time sheets (Man power, Equipment’s, Consumable Material). Organize action under the safety rules and regulations.