Project: Arctic LNG2 Responsibilities: Purpose - Supervise and direct subcontractors in the installation of Metal Structures, Piping and Welding, ensuring that they comply with and meet project requirements. Supervise construction and steel fabrication inspection activities for all fabrication management associated with subcontractors; Verify compliance of work with requirements specified in plans, specifications, codes, and other regulatory documents and subcontractor approved quality/ITP plans; Notify management of nonconforming conditions; Monitor and verify general arrangement drawings and shop drawings for steel structures in accordance with applicable contract standards. Conduct retention and witness critical inspection activities in accordance with ITP; Weekly, monthly KPI and statistical analysis reporting to quality control departments; Ensuring subcontractor's full compliance with inspection and test plan (ITP) requirements; Ensuring discussions with subcontractor to resolve any conflicts or issues; Attend meetings with subcontractor as needed; Issuing daily reports; Weekly report of inspection results; Develop and maintain a positive and respectful work climate with all employees; Maintain a culture of safety and quality; Communicate all business goals and objectives to employees; Be responsible for implementing and participating in all management initiatives.

Object: Reconstruction of ethylene oxide and glycol production with an increase in OPC SNH capacity Ensuring timely and high-quality performance of work on the annual plan (management of direct construction and installation work on capital construction, reconstruction, modernization and technical re-equipment of production facilities, repair of buildings and structures). Organization of work on the provision of executive documentation and transfer to regulatory authorities and subdivisions. Control over the targeted and rational use of funds for the implementation of capital investment plans, repair of buildings and structures. Initiation of competitive procedures and conclusion of contractual documents, technical examination of proposals of tender participants. Organization of accounting and reporting on capital construction, technical re-equipment and reconstruction. Control over the timely commissioning of facilities.

Capital construction object: PENEX ISOMERIZATION unit, LUKOIL Oil Refinery Participation in audits-reissues of PPR, technical maps and other documents for the functioning of the Department and application on the project; Preparation of check-lists, acts of entrance control, regulations, keeping records of issuance Prescriptions and tracking their elimination; Quality control of concrete and earthworks for compliance with the current PPR, technical specifications.maps, project requirements, informs the head of the Department about the rejection;- Participation in the survey of hidden works, acceptance of finished structures, carrying out the entrance -control's; Coordination of the work of laboratory technicians to control the temperature and humidity conditions when caring for monolithic reinforced concrete structures; Analysis of project documentation, identification of deviations, notification Of the author of the project and submitting change requests; Inspection of hidden intermediate works, issuance of permits for carrying out subsequent work with structures and making decisions about dismantling; Continuous quality control of concrete and earthworks at all stages of construction, by collecting the results of the work of engineers and technicians; Making visits to inspections of factories-suppliers of building materials and finished products (concrete products, bricks, blocks, etc.).

Capital construction object : Nizhny Novgorod Stadium checking the construction contractor's working documentation and PPR ; participation in the Commission for conducting input quality control of materials, products and equipment, incoming to construction sites ; implementation of continuous monitoring in the production process for the quality of the SMR for compliance requirements of regulatory and project documentation; verification of performance of technological operations for compliance with project documentation; checking the availability, correctness and timely execution of Executive documentation, confirming the implementation of the SMR in accordance with the requirements of the project documentation; control of completeness and quality of design by the construction contractor at the construction site Executive documentation in accordance with the list of requirements approved by the customer project documentation; quality control and terms of elimination of comments and violations, appropriate registration eliminated comments, warnings, and regulations by the construction contractor; verification of the results of quality control laboratories. contractor with the implementation of duplicate instrumental control by non-destructive methods in accordance with the procedure established by the regulatory and technical documentation; ensuring acceptance and confirmation of the volume and quality of the construction contractor's performance works'; issuance of permits to perform the next technological stage from the moment of presentation works by a construction contractor for acceptance; registration of reporting documents and transfer of operational information on the IC in established procedure; participation in the work of the Commission on commissioning of objects, investigation of the causes of accidents, incidents and accidents at construction sites where SC was carried out.

Capital construction projects: Cellular base stations Interaction with construction and Contracting organizations during construction and expansion the network of the macro-region; Quality control of construction and other works during construction and repair of Tele2 communication facilities; Organization of orders for equipment, materials, AMS; Maintaining contracts with contractors and construction organizations; Cost control for construction work, organization of work to reduce costs; Issuance of technical specifications and initial data for the design and construction of communication facilities macroregion

- Organization, coordination and control of all stages of construction at the entrusted object, the interaction of construction sites with adjacent departments, provision of the necessary design and estimate documentation, planning and provision of resources; participation in the calculation of the cost of planned and ongoing work; - Organization and control of the development and formation of a package of permits and as-built documentation, planning, use and redistribution of resources, planning and adherence to work schedules and equipment; - Planning and agreement with the Customer on volumes and terms, organization and provision of timely construction and installation works in order to strictly fulfill contractual obligations and timely commissioning of facilities; holding meetings and negotiations, interaction with the Customer, participation in production planning meetings and meetings with representatives of the Customer and the general contractor; - Organization and control of timely material and technical support of the facility with the necessary resources, rational use of inventory; assessment of the need to attract contractors - Organizations for the performance of work, control over the fulfillment of contractual obligations by contractors; - Control over the timing and quality of construction and installation and other construction work, over their compliance with the approved design and estimate documentation, building codes and regulations, standards and specifications, safety standards, industrial sanitation and fire protection, labor organization requirements; - Commissioning of construction objects, preparation of the necessary documentation for commissioning and commissioning; - Monitoring compliance with industrial safety, fire, gas safety, labor protection.

Object: Capital construction of panel multi-storey buildings - Implementation of construction control over the implementation of construction and installation works and acceptance of completed objects from contractor construction organizations. - Control over the security of construction with design estimates and normative and technical documentation. - Implementation of technical acceptance of completed construction and installation works and facilities, registration of the necessary technical documentation -Notification of the stages of construction with the provision of documentation to the GOS. Formation of documentation for the GOS. Conducting inspections of the GOS and obtaining an opinion from the GOS on the compliance of the facility with regulatory requirements. * Accounting for completed construction and installation works and reporting on the implementation of capital construction plans * Verification of working, executive documentation and PPR of the construction contractor

Application of timely characteristics of goods and materials in accordance with the appointment of structural units. - Negotiating with existing and potentially favorable conditions, concluding contracts / specifications / high values ​​and changes to them for the production of materials and equipment on the most favorable terms for the company's suppliers. - Procurement budgeting, procurement control, constant monitoring of prices and the most favorable proposals for the company. - Team management: coverage area between separate departments, organization of department work, coordination and motivation of employees, control of department performance indicators, improvement of procurement efficiency. - Organization of interaction with structural divisions. - Control of the procurement turnover document: control of the definition of the terms of the contract with suppliers, the timing of the proposal, urgent payment for the transaction for the purchase of goods, return of goods, claims work with suppliers and control of settlements for claims. - Preparation of natural materials for the organization of competitive procedures / tenders. Defense of tenders at the tender committee. - Drawing up and monitoring the implementation of the company's annual procurement plan. - Interaction with design institutes / the Customer by agreement of materials and equipment at the procurement stage. - Checking and agreeing on the cost of materials and equipment purchased by subcontractors.

- Ensuring timely deliveries of goods and materials in accordance with the needs of structural units. - Negotiating with existing and potential suppliers, concluding contracts / specifications / additional agreements and additions to them for the production of materials and equipment on the most favorable terms for the company. - Procurement budgeting, control of procurement prices, constant monitoring of prices and obtaining the most advantageous offers for the company. - Team management: distribution of areas of responsibility among department employees, organization of department work, coordination and motivation of employees, control of department performance indicators, improvement of procurement efficiency. - Organization of interaction with structural divisions. - Control of the document flow of procurement activities: control of compliance with the terms of contracts with suppliers, delivery times, timeliness of payment for transactions for the purchase of goods, return of goods, claims work with suppliers and control of claims settlement. - Preparation of the necessary materials for the organization of competitive procedures / tenders. Protection of tenders in the tender commission. - Drawing up and monitoring the implementation of the company's annual procurement plan. - Interaction with design institutes / the Customer by agreement of materials and equipment at the procurement stage. - Checking and agreeing on the cost of materials and equipment purchased by subcontractors.

Capital construction object: OZH Syzran Refinery When preparing a project: familiarization with the set of RD for TI; familiarization with the calculation of the contract price for TI; determining the need for equipment and tools for the production of work on TI for OMTS; determining the needs of personnel for the production of work; determination and approval of the location of the production and storage area of ​​the site. During the course of the project: instructing personnel on health and safety; control of inspections for acceptance and delivery; executed works; control over the implementation of construction and installation work on TI by the site personnel; control of the volume of work performed every shift; control of the work performed on the site, assistance to the work producers. End of the project: control over the delivery of completed works; control of delivery of executive documentation; control over the delivery of equipment and tools; control over the preparation of applications for demobilization of personnel.

Object: Capital construction of monolithic multi-storey buildings Ensures the fulfillment of production assignments for the commissioning of facilities in a timely manner and the implementation of welding, installation and commissioning works for all quantitative and qualitative indicators in compliance with work production projects. Organizes the production of work in accordance with project documentation, building codes and regulations, specifications and other regulatory documents. Ensures compliance with the technological sequence of the production of welding and installation works at the site (department). Carries out measures to increase the level of mechanization of work, introduce new technology, improve the organization of labor, reduce the cost of work, economical use of materials. Carries out measures to prevent marriage and improve the quality of work, the use of reserves for increasing labor productivity. Carries out work on the dissemination of advanced techniques and methods of work. Provides the receipt of technical documentation for the construction of facilities. Draws up applications for construction machines, vehicles, means of mechanization, materials, structures, parts, tools, inventory and ensures their effective use. Keeps records of work performed, prepares technical documentation. Participates in the delivery of completed construction projects to customers, individual stages and complexes of work on the facilities being commissioned. Prepares the scope of work for subcontracting (specialized) organizations and participates in the acceptance of the work performed from them. Draws up permits for the right to work in security zones. Establishes production assignments for foremen in terms of the scope of welding, installation and commissioning works, and controls their implementation. Instructs workers directly at the workplace on safe work practices. Provides the use of technological equipment (scaffolding, scaffolding, protective devices, fastenings for the walls of excavations and trenches, struts, conductors and other devices), construction machines, power plants, vehicles and protective equipment for workers. Monitors compliance with the norms of carrying weights, cleanliness and order at workplaces, in aisles and on access roads, correct maintenance and operation of crane runways, providing workplaces with safety signs ..