Static Equipment Engineer. Technical Maintenance and Repair Group. Mechanical Engineer at Air Liquide Munay Tech Gases LLP (Atyrau site) and Air Liquide Karabatan Tech Gases LLP December 2024 to december 2025 SMR-1 / SMR-2 .ASU-1500/ASU-3000. Steam Reforming Cryogenic Air Separation Adsorption Units (PSA — Pressure Swing Adsorption) Monitoring the technical condition of static equipment: heat exchangers, columns, vessels, tanks, pipelines, furnaces, etc. - Developing and implementing maintenance and repair plans (Preventive/Corrective Maintenance). - Preparing technical documentation: defect reports, operating procedures, instructions. - Participation in surveys, inspections, and industrial safety assessments. - Coordination and control of non-destructive testing (UT, PT, RT, VT, etc.). - Equipment record keeping (asset register) and repair history. - Interaction with contractors, control over the quality of work performed Problem Identification and Analysis: Skilled in promptly detecting deviations from standards, requirements, or project documentation during engineering and production stages. Report Preparation (SR/NCR): Competent in creating accurate Service Request (SR) and Non-Conformance Report (NCR) documents, including detailed problem description, root cause analysis, impact assessment, and proposed corrective actions. Registration and Tracking: Experienced in using non-conformance tracking systems for timely registration and status monitoring of reports. Verification of Corrective Actions: Ability to validate the implementation and effectiveness of agreed corrective measures. Closure of Non-Conformances: Preparing final documentation to confirm resolution and compliance with standards, ensuring proper record-keeping for audits. Communication and Coordination: Strong collaboration skills with internal teams, contractors, and clients to align actions and deadlines. . - Participation in equipment failure investigations (Root Cause Analysis). - Ensuring compliance with standards (API, ASME, GOST, etc.).

Welding and Mechanical Quality Assurance and Control Inspector June 2023 to present - 2024 Company: TUV Rheinland (Tengiz) Project: Maintenance Welding Work Shop TCO Quality assurance of routine mechanical and welding work, close collaboration with the Planning and Engineering team, identification and prevention of hazardous factors, monitoring of welding and repair work according to the Repair Plan, coordination of NDT methods, documentation completion. Participation in walkthroughs before commissioning of lines or equipment. Quality control of welded joints and the content of relevant documentation; supervision of installation and welding of pipelines and metal structures; Visual inspection of welds for surface defects; quality control of pipeline construction, installation of equipment, metal and pipes, assembly, welding, installation of metal structures and pipelines; Carrying out quality control work for construction in the oil and gas industry in accordance with standards such as ASME, ASTM,API,ASNT

- Verify construction activities are carried out with respect to project requirements, ensure all are activities are in line with approved documents. Ensure that all activity is completed in accordance with project requirements - Carry out physical inspection of all piping / mechanical installations. Review and signing of Record of Construction and Quality Inspection (RCI) with respect to approved. - Approved design international industrial codes standards, and procedure. Inspection Test Plans - Monitor process / utility piping tie-ins and crossing works are in compliance with the established procedures and ensure all NDT examinations have been performed properly. - Ensure the safety is adhered to at site. Assure all technical documents relative to site quality control are status of current. HVAC (Heating, Ventilation and Air Conditioning System): Inspection the system installation during construction to check conformity with plans and specifications. Checks performance after testing and balancing. - Witness hydrotests, leak test as appropriate of Pipelines and Heat Exchangers. - Monitoring workflow and status of each job and ensures all process are complying with requirements. - Ensure that all the materials purchased and processed for the manufacturing products are handled in a manner that ensures that no damage or deterioration occurs from the time of entry to the time of installation. - Witness Joint fit-up, Checks WPS and Welder Qualifications, check electrodes, weld process and pre-heat are consistent with WPS. Perform Welding audit, checking that heat input values and inter-pass temperatures are maintained during the welding cycle. - Monitor contractor performance and review of documentation as work progresses will be required. Verifying the documentation for certification and as-builts.

Providing control and quality for the installation of equipment, Verification of orientation, alignment with drawings Checking the correct layout and detection of defects in transportation Centering pumps using INDICATORS Preparation of documentation for delivery to the customer Update progress on Static Equipment and Rotating Equipment and on a vessel under HIGH pressure Duties: Quality control of welded joints, content of relevant documentation; Inspection of installation and welding of pipelines and metal structures; Visual inspection of welds for surface defects and splashes, Quality control of pipeline construction, installation of equipment, insulation, corrosion protection of metal and pipes, assembly, welding, installation of steel structures and pipelines; Performance of works on quality control of construction in the construction of oil and gas industry in accordance with standards such as ASME, ASTM; Monitoring the quality of welded joints of pipelines from 1/2 "to 36" in diameter (12.7-914.4 mm), metal structures, in the welding process control technology (SMAW / GTAW); Preparation, filling of welding registers procedures welding sheets, design estimates and other technical documentation for transmission objects in accordance with the requirements of the customer; Working with quality documentation, monitoring compliance with the quality standard ISO 9001: 2000. Check the screw for the relevant standards if they have been properly lubricated and tightened with the appropriate tool in accordance with the specifications; Verification of conformity of calibration records of equipment and calibration conditions with manufacturer's instructions; Walk and inspection before testing; Preparation of documentation for the auditing body, supervisory and supervisory bodies; Work and interaction with NDT and heat treatment of laboratories; Verification of compliance of material needs with drawings and specifications; Inspection of installation and welding of pipelines; Organization, management and coordination of welding technology, preparation of executive documentation

Quality control of construction and installation works, observance of technical regulations, construction norms and rules, technical conditions and production technology, control of the installation of materials and products, their compliance with the established requirements according to the approved standards of the customer; Ensuring performance of tasks to improve the quality of work. Analysis of information on the current quality control of works and execution of documents certifying their quality. Control of all QC documentation and preparation of work packages for the customer Control over the correctness of the assembly of pipes, flanges, fittings before welding in accordance with the drawings of the project. Visual inspection and inspection of welded joints, daily visual inspection reports Update of the quality control database, reports on welds welds Testing of the weld test (RT, MT, PT, PWHT, Hardness), and their control Control of the percentage of non-destructive testing according to the specification and welding procedure Inspection (inspection) of welding of building structures: mapping (drawing up of the scheme), control of dimensions in accordance with the drawings Checking the Pipeline and KiP Schematics, the latest versions of the isometrics, the execution of the executive drawings Monitoring of aboveground and underground welding operations Draw a change (for executive documentation) Hydrostatic and pneumatic tests: completion of relevant documentation, control in accordance with SNiP standards Monitoring of the list of work in progress Acceptance and delivery of documentation of work performed Monitoring and conducting the necessary tests of the qualification of welders Monitoring and tracing of surface damages of materials (pipes, fittings and fittings)

Description of the work. Maintenance of the technological process and supervision of the operation of the equipment in installations of category III for the processing of oil, oil products, gas, oil shale and coal in accordance with working instructions. Conducting the technological process and monitoring the operation of individual units in installations of I and II categories under the supervision of an operator of higher qualification. Adjusting the performance of the unit, installation, separation. Warning and elimination of process deviation from the specified mode. Control of output and quality of products, consumption of reagents, energy resources. Starting and stopping the heating system of chamber and tunnel furnaces and adjusting their hydraulic regime; Maintenance of belt conveyors, screening, classification of petroleum coke by fractional composition under the supervision of an operator of higher qualification in delayed coking plants. Servicing of control and automation devices, harvesting cartograms, changing them, pouring ink in pens, checking instruments for "0". Observation of the state of the masonry of the heating system. Start, stop the installation and output it to the mode. Preparation of individual devices and the installation as a whole to repair. Participation in the repair of process units. Must know: technological processes, schemes and maps of serviced installations; The device of the process equipment, control and measuring devices, pipelines, armature; Factors affecting the course of the process and the quality of the products.