• Proven ability to work in large MCPs and deliver towards critical milestones including working collectively with technicians to overcome technical issues. • In-depth understanding of Commissioning and Start-up sequence fishbone diagram, SC turnover strategies, and transition management plan for area • Has demonstrated success delivering all the requirements for completion including leading punchlist closure, red-lines, resolving engineering queries/discrepancies and supporting smooth and efficient turn-over to operations • Sound knowledge of MC completions processes and experience with Completion Management Databases • Understands the requirements/strategies/tactics of construction execution to enable them to effectively react and develop mitigation plans to changes in construction plans. • Has proven results as both an effective leader and individual contributor in leading commissioning teams of engineers and technicians • Can effectively and efficiently produce a commissioning schedule working with planners in P6 • Can lead effective meetings to simply present information and drive consensus with peers/stakeholders on recommendations/observations • Experience working in the Artic Environment and in commissioning of large enclosed modules (preferential but not required) • High critical thinking/reasoning ability • Effective communication skills, English both verbal and written essential • Strong organizational skills • Previous experience with client / contractor interfaces. Previous TCO/ Chevron/ XOM experience preferred. • Deputized for their assigned I&C building/area working directly for the Kent Discipline Lead to deliver their assigned sub-systems to RFSU (“Ready for Start-Up”) including but not limited to: • Leading schedule reviews and driving progress against plan • Interfacing with other disciplines to ensure execution plans align with supporting discipline requirements and sequences. • Driving all deliverables to closure for RFSU including punch list, red-lines and engineering queries. • Proactively removes execution constraints in the supply of personnel, materials, equipment, and services for their assigned area. • Preferably English and Russian reading, writing and speaking. • Knowledge of best practice and procedures in line with large-scale industrial projects. • Fully trained in all Safety related subjects outlined by Company such as RoK regulatory Requirements, Environment concerns, Safe Operations, Emergency Response, Firefighting and breathing Air Equipment, JHA, Permit to Work & MOC. • Fully trained in Incident & Injury Free and fully understand the expectations, duties and responsibilities • Fully trained to sign permits using the permit to work system and capable to lead the toolbox meeting and ensure the JHA is fully understood by the technicians and trainees. • Prepare PTW / JSA for the safe and timely manner to execute work scope. • Possess all the qualifications outlined under the I&C Engineer job description. • Fully competent in reading and understanding Instrument Loop Diagrams, P&ID’s, DID’s, Electrical Schematic Diagrams, Layout Drawings, Datasheets, Block Diagrams, Interconnection and Termination Diagrams, Instrument Hook-Up Drawings, Instrument Index, Alarm Lists and Cause and Effect Diagrams. • Possess good computer training on software packages such as Word, Excel, PowerPoint and Visio. • Confirm / Verify, all relevant documents and procedures are in place prior to loop testing. • Confirm instrument function, configuration etc. as per test procedures. • Execution of instrument commissioning testing as per project requirement. • Conduct line walks and pre-system/ sub-system completions checks. • Preparation of required materials, tools and consumables for commissioning testing activities. • Completion of commissioning documentation to include but not limited to, check sheets, Commissioning redlines and Site Acceptance Test procedures. • Time split between field and commissioning office shall be 40/60. • Instructs, supervises and provides execution priorities, technical direction to Senior I&C Technicians, Engineers, Vendors and specialist subcontractors/third party personnel to deliver to Static and Dynamic Commissioning targets. • Work planning, resource planning and forecasting, including Level 4 planning development and support. • Detailed office based work preparation including resource planning, vendor tools plant and equipment planning on a four-week look-ahead basis. • Ensure the right resource levels and technical skills are assigned to meet the Area’s schedule and commissioning execution requirements. • Ensure required competencies and work standards are maintained in the discipline commissioning team and any deficiencies are addressed. • Supports the Discipline Commissioning Leads on discipline commissioning issues. • Daily coordination with TCO counterpart to execute project completion plan and ensure smooth handover to Base Business/Ops. • Provide feedback for engineering design fault / installation deficiencies. • Attend MC Walkdowns and verify construction activities comply with general practice and design drawings. • Lead and manage day-to-day activities of Technician and Engineering workforce. • Multi-discipline coordination to support work-scope. • Carry out pre-commissioning and commissioning activities. • Fill out respective check sheet/procedures and close out sub system punch lists. • Liaise/Supervise vendor and other commissioning contractor. • Utilize project software tools i.e. MCPlus, Core Worx, CMS etc.

• In accordance with the instructions of the company, train the employees of the subcontractor to carry out electrical and thermal insulation works; • Install company supplied power cables and components, heating cables and components, junction boxes, electrical distribution boards, electrical trays, thermal insulation; • Install, inspect and test the heating circuits and ensure that the installation complies with the requested standards and customer specifications; • Measurement and installation of cables and components; • Inform the project engineer / manager about the progress of work on the project; • Carries out technical control over the implementation of construction and installation works and the acceptance of completed objects; • Controls the progress of capital construction plans, compliance with the volume and quality of construction and installation works. Quality control of the materials used; • Resolves issues on making changes to the project in connection with the introduction of more advanced technological processes; • Takes part in the consideration and approval of changes in design solutions arising during construction, decides on the replacement, if necessary, of materials, products, structures; • Examines the reasons causing delays and deterioration in the quality of construction and installation works, takes measures to prevent and eliminate them; • Controls the quality of elimination of imperfections in a timely manner; • Keeps records of completed construction and installation works and reports on the work performed; • Provides safe working conditions for workers, monitors compliance with current labor standards and rules; • Timely instructs workers on health and safety issues, prom. sanitation and fire safety, checking the mastering of these rules by workers and strict adherence to them; • Controls the quality of the work performed; • Respond to the requests of the subcontractor and find solutions in the shortest possible time; • Interact with a representative of subcontractors for pipeline, insulation and painting works; • In emergency situations, provide first aid in areas where first aid is not provided by the client; • Provision of test certificates and daily reports as required; • Interaction with customer representatives for quick solutions to emerging issues; • Controlling work performed by subcontractors; • Conduct site risk assessments and report safety incidents; • Be the representative of the company according to the instructions of the project manager; • Ensure proper and safe management of entrusted vehicles in the process of performing official duties in compliance with all established rules and regulations of the road and inform the Company's Management about any facts that threaten the safety and security of entrusted vehicles, including violations of traffic rules, execution of administrative protocols, etc. • ensures the implementation of the obligations of the Policy and the functioning of the CM in the division in relation to the assigned tasks and subordinate employees in accordance with the requirements of the ISO 9001, 45001 (OHSAS 18001) standard; • organizes the work of the subdivision and subordinate personnel in accordance with the requirements of the CM documentation, controls the implementation of these requirements; • identifies and assesses risks, and also identifies and implements opportunities associated with the activities and processes in which the unit is involved; • ensures the achievement of the established indicators (results) of the process and activities in which the unit operates; • conducts the process of identification of hazards and risk assessment for the personnel of the unit in order to develop and implement methods of their management to reduce injuries and ensure the health of personnel; • organizes the updating of activities and documented information in case of changes to ensure the integrity of the management system and revise the risk assessment and the possibility of the unit's activities; • informs the staff about the importance of compliance with the requirements of the CM documentation, as well as in case of changes in it; • ensures the safety of the property of the supplier (contractor) in the case of using the service (products, equipment, etc.)

Review P&IDs, I/O schedules, C&E diagrams, block diagrams, etc. prepared by others, prepare new/modification of existing PAS equipment scope and interact with client to finalize the scope; Develop PAS equipment specifications and engineering drawings; Prepare modification of existing PAS equipment engineering/vendor drawings; Review PAS equipment bidders technical bid and prepare TBE; Review PAS equipment vendor deliverables and provide approval; Manage PAS equipment package; Develop Automation Work Packs; Defining scope for PAS modification; Participation in; Client meeting; P&ID reviews; Control Objectives Analysis review (COA’s); HAZOPs; Cause & effect review meetings; Shall be conversant in Process Control/ ESD/ F&G philosophies/ specifications, different type of instruments, I/O schedules, block diagrams, etc; Possessing technical knowledge on Honeywell, Allen Bradley and HIMA control systems; Participate in safety reviews, HAZOPs and SIL Assessments; Participate in client and contractor technical meeting; Interact with site construction / commissioning / client team and resolve all technical problems; Ensure Safety in design and HSE requirements; Undertake checking and approval activities in accordance witch company procedures; Undertake internal QA checks on discipline activities and deliverables.

• Perform Pre-Commissioning and Commissioning of Fire and Gas Detection System by utilizing Siemens, Tyco and VESDA systems in Utilities and Process Area. Also Skilled in Fire and Gas instrument installation, Trouble Shooting and and Wiring. The work needs to be carried out by the plant Permit to work system, PPHA and JSA. • Confirm correct Zoning and indications on Graphics, Mimic panel, Local fire alarm panel, Main FGS alarm Panel matches with the field value.Calibration/warming up of detectors by using Cal Gas bottles. • Loop checking of FGS instruments Detectors like H2S(Hydrogen Sulfide), LEL Detectors(Low Explosive Limit), H2 Detectors(Hydrogen Detectors), O2(Oxygen Deficiency Detectors), IR Fire/Gas detectors, Open Path Gas Detectors(Line Of Sight detectors), Smoke and Heat detectors, Manual Call stations, Flame Detectors, Alarm sounder and Beacons and fire dampers with digital input/output. Familiarity with Deluge and Suppression Systems desired as well as experience with F&G addressable Systems • Familiarity and experience completing test check sheets • Carries out systematic function test, calibration and repair of various types of combustible gas detectors, toxic gas detectors, flame detectors, smoke detectors, horns, beacons, speakers, F&G controllers, deluge systems and informs any serious abnormalities as observed to Leads for his advice and direction. • Ensuring that the integrity of the Fire & Gas systems and all safe working within the procedures. • ‘Redline’ of relevant documents in accordance with project procedure • Coordinate with Vendors in accordance with commissioning schedule • The Lead Instrument F&G Engineer shall work in accordance with strict system guidelines, established procedures, standard practices, brief notes or detailed instructions. • Documenting inspection, testing, repair and failure data within the company adopted database system • Use and care for tools and equipment employed to perform calibration, testing and repair • Read and interpret F&G detection system drawings such as Loop drawings and Cause and Effects as well as understanding various F&G related codes • Depends on the project requirements F&G Engineer will need to oversee Loop checking activities, support troubleshooting and Function Testing of various PCS/SIS Instruments (Level, Temperature, Pressure, Flow, Control Valves, Shutdown Valves ... etc.) • Loop checking of Inter-trip signals from F&G, SIS and PCS systems

Reviewing and controlling over the execution of Technical Requests and Data Requests (interfaces) with all necessary applications, analyzing their impact on the schedule and costs of design. Keeping registries of those documents. In case of data changes made by Client, developing “Request for Change” and reviewing and controlling over technical documentation. Directly contacting with specialists in the appropriate field (Project section), Client, general designer, subcontractors for design work, Representative Office of the Company. Reviewing and preparing technical solutions at requests of the above organizations. Checking all documents of the Project’s appropriate section for compliance with: a) all requirements of Client; b) RoK standards; в) whether solutions and materials are acceptable in terms of approved procedures for construction and installation works. Preparing and executing comments, changes in the project, tracking updates of documents at all stages of designing for the appropriate section. Analyzing the impact of technical queries and solutions on the schedule and costs of design and delivery.

Preparing draft Basis of Design for Instrumentation, coordinating appropriate parts of Basis of Design with parties concerned, controlling packages with necessary applications. Generating a registry of documentation to be issued with appropriate specialists of subcontractors, controlling over the Project’s section under consideration. Generating and keeping track of internal and external interfaces for the Project section. Ensuring that the schedule of work on the Project’s section is met. Checking all documents of the Project’s appropriate section for compliance with: a) all requirements of Client; b) RoK standards; в) whether solutions and materials are acceptable in terms of approved procedures for construction and installation works. Preparing and executing comments, changes in the project, tracking updates of documents at all stages of designing for the appropriate section. Analyzing the impact of technical queries and solutions on the schedule and costs of design and delivery. Reviewing and controlling over the execution of Technical Requests and Data Requests (interfaces) with all necessary applications, analyzing their impact on the schedule and costs of design. Keeping registries of those documents. In case of data changes made by Client, developing “Request for Change” and reviewing and controlling over technical documentation. Directly contacting with specialists in the appropriate field (Project section), Client, general designer, subcontractors for design work, Representative Office of the Company. Reviewing and preparing technical solutions at requests of the above organizations. Reviewing and preparing comments on Reports of designing works performed for the appropriate section for MCC Management. Reviewing, approving, or preparing comments on the supplying of materials and equipment according to requests received by Supply Department. Making calculations, performing design work, having issued drawings approved by Client with respect to the appropriate section in accordance with the approved schedule. Participating in the activities for preparing tender proposals of potential clients, defining scopes of materials on instrumentation systems and providing data in the approved form to the Marketing and Contracts Department. Preparing requests for materials in accordance with the verified design specifications and drawings and further handing over the requests to the Company’s Supply Department.

Carrying out input control of materials and instrumentation and Electric equipment once arrived at the warehouse. Control over quality of works performed by subcontractors. Generating "Loop Folder" and submitting it to Client. Preparing the inspection of work performed by subcontractors, checking the availability of all required supporting documents and deliverables... Preparing systems and subsystems and their delivery. Keeping industry-specific building code Keeping Client’s Check List documentation

QC Engineer: Keeping RoK documentation Installation Quality Control (instrumentation and electrics). Delivery of work performed to the customer with the signing of established acts. Submission of actual drawings to the installation personnel. Preparation and submission of executive drawings. Head of area Responsibility for construction and installation operations Control over work process execution Meeting with the customer Meeting with the contractor. Planning for upcoming work. Delivery of work performed to the customer. Signing of acts of work performed.