Strict implementation in the project site for compliance of the EHS program and PTW procedure. Enforcing strict rules of no one will work in site without work permits, Eliminating hazardous energy by properly identifying isolation points in ( ICC ) Isolation Confirmation Certificates and stated step by step in the Risk Assessment prior of issuing the work permits. The efforts resulted in achieving the milestone of successfully completed the test (1st Fire Full Speed no Load) without a single near miss or incidents. Implementation and execution of the Lock Out Tag-Out (LOTO) program, including training, development and revision of procedures, and periodic auditing of program compliance. Works on site only proceeds when required Job Safety Analysis / Risk Assessment have been completed and are reviewed by a competent person and communicated to those who can be impacted by the hazards identified.

Responsible for managing and organizing the proper application of the Permit to Work System ensuring that the procedures and safety guidelines satisfy the company rules and regulations. He communicates with all competent employees who perform or supervised work where Permit to Work must be applied. Reporting directly to the Construction / Conversion / Commissioning Manager regarding compliance of the PTW target to have zero accidents in areas where PTW is required. Preparation of work permits and site visits during the planning of work and isolation's prior to AA verification. Ensuring all hazards and controls have been identified and controls in place. Examine project priority work scopes are highlighted then managed safety and efficiently through permit process, aiding execution by undertaking work-site inspections prior to during and on completion of each task.

Issuance of daily work permits, see to it that proper attachment is in place like SLD, P&ID, JSA, Risk Assessment and the work applied for are having DMCC ( Discipline Mechanical Certificate) to show the system is totally completed and is ready for energization. Boundary Limits of acceptance are properly highlighted; isolation points are properly marked and Notice of Energization are already circulated To make daily site inspection to make sure all work permits description, isolation's are properly followed per PTW procedures and project requirements. On site cancellation of work permits that are violated by the workers to make sure safety of workers are strictly adhered.

Designated by the OIM, Commissioning Manager, Conversion Manager to be responsible for coordinating and administering the Permit to Work System. He must ensure the implementation and administration of the Lock Out Tag out under the PTW Procedure. Encoding all work permits in the PTW Tracking Data Base. Make sure isolations certificates (ICC) are cross reference to all active work permits that requires LOTO to prevent conflicting activities with the construction, commissioning and operation. Providing safety management and supervisory leadership in Implementing Permit to Work Procedure, Reviewing JSA attachment to work permit ensuring hazardous energy are eliminated prior of issuance for the Work Permit to areas where the work will be executed. Implement proper PTW training modules that will suit to project requirements. To make sure System Responsible Engineers, Area Authorities, Performing Authorities, Isolating Authorities are properly train to an appropriate level in the Permit to Work System per their function on site. Daily and weekly audits is done in the PTW system. To operate as the Central Coordinator of all work permit including the provision of formal authorization that all permits & preparations required have been examined for mutual compatibility. To assume responsibility to answer OIM and has the OIM authority to suspend or to refuse to issue work permit, I consider unsafe or incomplete

Implementation and execution of the Lock Out Tag-Out (LOTO) program, including training, development and revision of procedures, and periodic auditing of program compliance. Works on site only proceeds when required Job Safety Analysis / Risk Assessment have been completed and are reviewed by a competent person and communicated to those who can be impacted by the hazards identified. safety guidelines satisfy the company rules and regulations. He communicates with all competent employees who perform or supervised work where Permit to Work must be applied. Reporting directly to the Construction / Conversion / Commissioning Manager regarding compliance of the PTW target to have zero accidents in areas where PTW is required. Preparation of work permits and site visits during the planning of work and isolations prior to AA verification. Ensuring all hazards and controls have been identified and controls in place. Examine project priority work scopes are highlighted then managed safety and efficiently through permit process, aiding execution by undertaking worksite inspections prior to during and on completion of each task.

Ensure adequate facilities, procedures and trained personnel are available for all foreseeable emergencies. Ensure that periodical inspections and drills are completed. Ensure compliance with the customer EHS requirements and applicable local regulations. Weekly safety inspection of construction activities to monitor compliance with Project EHS program and applicable regulations. Edit safety inspections reports. Regular EHS inspection of each subcontractor to challenge them & check their compliance with the Site EHS Plan (at least 1 subcontractor per week). Stop works where condition exist which is Immediately Dangerous to Life or Health ( IDLH ) or damaging to the environment , inform partner ,edit report, propose corrective actions , tract actions until closure and check the application of disciplinary action system. Good ability to represent complex technical issues in Construction, Commissioning matters related to Permit to Work System procedures in reports and presentations.