- Acting as the Project’s focal point for all activities affecting the use of the System of Project Inspection Testing Certificate and Handover, the SPITCH. - Ensure the development and implementation of the Project’s SPITCH meets the technical and schedule requirements. - Identify appropriate means of managing the transitions due to the Project’s multiple execution phases and locations. - Ensure the hand-over priorities and requirements between Hook-up and Commissioning team are properly represented in SPITCH. - Ensure that the SPITCH suitably supports the Projects requirements to obtain necessary certification from the RoK authorities. - Ensure that the SPITCH training program and documentation meets Project’s requirements. - Undertake audits of the SPITCH performance to ensure any further need of training and development are identified and implemented at the earliest opportunity. - Ensure all learning points arising from the use of SPITCH are identified for consideration and incorporation. - Ensure SPITCH reports are developed and issued so that responsible and affected parties are advised of its. - Regular communication and interaction with Stakeholders. - Full support of construction progress and pre-commissioning and commissioning, the entire life cycle of the project till handover of a facility to the Operation.

Job Responsibilities: Worked with Gathering Operations, Maintenance, Systems Completion, Quality Control, Information Management, Regulatory Affairs and with other teams to verify the completion of Project Regulatory Deliverables to provide assurance that the facility is ready for Operations. Was responsible for completing all work related to the validation of Regulatory Affairs (RA) Deliverables for Gathering Operations Acceptance and Handover Packages in CMS. Worked with delivery work processes for the verification of Handover deliverables to support a smooth turnover to Operations. Worked with all responsible parties to ensure the Regulatory deliverables (permits, certification, passports etc.) for Operations Team. Worked closely with Gathering Regulatory and Systems Completion teams to align the work processes for the verification of completion of RA documents in FGP CMS (Completion Management System Tool). Leaded and worked with Project teams (Gathering Systems Completion, Regulatory Affairs, Operations and Maintenance etc.) and TCO Base Business RA organization to implement agreed Regulatory Deliverables validation work processes and Procedures consult with all involved responsible stakeholders if needed. Review and verify the completion status of Project and Operations Deliverables required for a safe Start-up:  Equipment Non-Registered Passports (Valves, Piping, PSV, Motors etc.)  Equipment Registered Passports (Pressure Vessel, Crane)  System Level Passports (Cathodic Protection, HVAC, etc.)  Technical Piping Passports (Piping and Pipelines)  Regulatory Compliance Status (RA documents, certificates (Certificate of Conformity, Certificate of Sanitary Registration (SES), Letter of Exemption, Metrology Certificate Attestation, Metrology Certificate of Type Approval, Permit to Use, Acts, citations)  Monitor the readiness status of sub-systems.  Review and verify PSI As-built drawings (ME&I disciplines) in Mechanical construction and Pre-Commissioning/ Commissioning stage.  Coach others to use PSI for Process Safety decisions and activities in CMS.

Job Responsibilities: A focal point for Phase 5 Ops Delivery Team in Tengiz, represented Completions in various engagements meetings, working closely with Turnover Team and FGP FE Tie-In Representatives. Coordinated all issues and concerns (raised queries) by Completions Team with responsible departments: Field Engineering, PDDM, Operations Representatives, Site RA, Maintenance and TA teams leading to the close out. Review and comment Job Packages from Contractor in CoreWorx system. Work with MOC (Management of Change). Checked and tracked MOC until close. Tracking in CMS Engineering Tags which were provide by ARD (Asset Data Register) Team. Checking As-built drawings and release to back drafting.

Job Responsibilities: Review and verify the engineering data used for the first population of EMDB (Engineering and Maintenance Database) Database. Responsible for the data contained within the EMDB Database for work being undertaken by an Execution Contractor. Monitoring and control of the EMDB Database data updated by the Execution Contractor and NCOC Construction and Commissioning for accuracy, correctness and completeness. Review and verify the quality of the data populated within EMDB Database against NCOC standards and procedures. Assistance to Engineers to back draft AS-BUILT drawings using AutoCAD. Initiated and developed the Ex register, accurate logging all relevant information into Ex Register Database. Verification equipment by certificates and zone classification by hazardous area classification layout drawings. Performing Ex inspections in the field to recognise that the criterion for determining if electrical/instrument apparatus is certified for use in installed area is not only based on the zone classification, but on the selection of the gas group and ambient temperature for the flammable atmosphere. Review and verify the quality of the Ex data populated within Ex Register Database for accuracy and completeness; if required to update the data (such as temperature class, approval authority, certificate number, manufacturer, model, serial number, source drawings). Creating work packs for performing site inspection, equipment integrity verification, check Ex data as per certificates (ambient temperature range, protection type, gas group, temperature class and etc.). Day to days support for training and advice on the use of the EMDB Database.

Kashagan Development Experimental Project Offshore Hook-Up Commissioning / Completions Group Job Responsibilities: Review and verify the engineering data used for the first population of CMS Database. Responsible for the data contained within the Completions Management System CMS Database for work being undertaken by an Execution Contractor. Monitoring and control of the CMS Database data updated by the Execution Contractor and NCOC Construction and Commissioning for accuracy, correctness and completeness. Review and verify the quality of the data populated within CMS Database against NCOC standards and procedures. Identify and report in accuracies, anomalies and omissions of data within the CMS Database and ensure corrective actions are implemented to rectify. Day to days support for training and advice on the use of the CMS Database. Ensure the Mechanical Completion (MC) and Pre-Commissioning Completion (PC) dossiers compilation by Execution Contractors that are in compliance with QA/QC requirements and advice of anomalies. Created and validated the Completions Registers and Reports for the following Completions deliverables: o Line List Completions Report. o Piping Pressure Test Completions Report. o Piping Leak Test Completions Report. o Ex Rated Equipment Completions Report. o P&ID Register. o Machined Joint Completions Report. o Guaranteed Joint (Golden Weld Joint) Register Completions Report. o Vessels and Tanks Completions Report. Generation of Completions weekly report as per standard proforma for submission to Sn. Completions Engineer for review.

Kashagan Development Experimental Project Offshore Hook-Up Commissioning / Completions Group Job Responsibilities: Develop Joint Integrity Metadata’s for Offshore Site Critical Service Lines in Completions Management System (CMS). Assign Joint Tag Number IDs for Mechanical Joints by using piping isometric drawings. Issue Joint Integrity Source Drawings with Marked Up Joint IDs. Populate, validate and maintain the Joint Tag register within the ACS against Project standards and procedures. Monitoring the population of the CMS Database for accuracy and completeness. Review and verify the quality of the data populated within the CMS Database against AgipKCO standards and procedures. Identify and report inaccuracies, anomalies and omissions of data within the CMS Database. Final inspection and document verification prior the Systems are turned over to Pre-Commissioning and Commissioning Team. Coordinate with AgipKCO QA/QC Inspectors, Construction representatives to assure Completion Joint Completion Certificates and Handover Documentation are completed and provided as per Milestone Schedule. Day to day operation, including updating ITRs within CMS Database of completions records. Manage and update Ex Equipment Registers and Inspection Records in CMS Database for accuracy and completeness. Reviewing and consolidation of all red line mark-up drawings, verifying the correct technical content and suitability for transfer to engineering department. Reviewing and mark up Piping and Instrumentation Diagrams with Test Limits boundaries for Hydro Test and Leak Test Coverage Reports (validate during the population of Index and Mark-up drawing with all Test limits that applicable lines and drawings correctly assigned and updated within CMS Database for Hydro test and Leak test applications and related Mechanical joints). Keep track, update information in CMS Database. Compilation and verification of handover dossiers in line with agreed system handover procedure and transferring handover documentation to IMIS Project Documents Storage System. Reporting status of Completions deliverables by Systems, Areas & Modules.

Tengizchevroil, Railroad Project, Tengiz Job Responsibilities: Working out topographical surveys scales and exploration area for design and create in CAD format. Performs complex surveying, providing exact match project geometric parameters and coordinates, elevations of objects and structures in their placement and construction. Creating and updating topographic maps in CAD format. Creation of horizontal and vertical geodetic networks survey. Geodetic support for construction. Creation of planned and high-rise justification. Land works. Main axes stakeout of constructions and routes. Deformation monitoring of constructions (bridges and lighting poles). Measuring heights of inaccessible points. Performing executive surveys. Design of Tengiz station lighting systems. Design of communication cables routes. Service roads design. Design of snow protection on railway tracks. Design of additional land allotment for rail and service roads, documents preparation. Design of “Railways for Future Growth” Project (FGP).

Kashagan Development Experimental Project Karabatan/Atyrau Job Responsibilities: Works with Heat conservation (HC) insulation of piping as per specification and drawings. Marking up in P&ID to indicate scope of completed insulation. Assisting Engineers with document providing (P&ID, ISO and etc.) and information. Interface with Client as per the documentation issues. Handling day to day document/drawing control activities. Received and sent CAD files across the internet. Reviewed all incoming drawing requests for completeness of information. Updated drawings with changes. Able to create in CAD detailed drawings based on information provided by Engineers and Customers.