- Providing strategic direction to the business under the guidance of the Board of Directors. - Deciding on investment options and recommending them to the Board for approval by the BOD. - Mobilizing all stakeholders to support the vision and mission of the organization. - Supervision of enterprise projects , and coordination of engineers. - Developing specific strategies to ensure the long-term viability and sustainability of the organization. - Developing strategies to retain and attract the best talent available in the market. - Developing succession plans to support all critical positions within the company. - Developing a risk model to support all value chains within the business. - Developing a strategy to support the social responsibility activities undertaken by the business. - Developing and maintaining an organizational culture that is aligned with the long-term strategy of the business. - Developing and implementing a sustainable internal system and strategy that can withstand external temporary shocks. - Ensuring the organization is at the forefront of using digital technologies to support the business strategy. - Ensuring the organization is fully compliant with all legal and regulatory requirements. - Ensuring that all business activities of the organization are adequately funded. - Understanding the needs of key stakeholders and developing a strategy to meet those needs to achieve the organization's vision and mission. - Developing best practices for corporate. Governance. - Developing strategies to improve business sustainability.

Managing the activities of the technical departments of the enterprise in accordance with the current legislation and production plans. Ensuring the development of production plans and schedules, analysis of their implementation and their adjustment, preparation of annual and long-term plans for the development of the material and technical base of the enterprise. Management of the assessment of the effectiveness of investment projects and the risks arising from their implementation, the effectiveness of structural transformations in the industry. Organization of project expertise and evaluation of their economic and financial efficiency. Ensures the rational use of natural resources, energy, materials, personnel, and technical means. Organization of environmental expertise. Ensuring that the enterprise fulfills all obligations to the Republican, regional and local budgets, state extra-budgetary social funds, suppliers, customers and creditors, including bank institutions, as well as business and employment contracts and business plans. Head of the development of measures to improve the activities of the technical departments of the enterprise. Approval of the structure and staffing of the enterprise, monthly staff work schedules, regulations on structural divisions and job descriptions of employees of technical departments. Ensuring the selection and correct placement of personnel, professional development of the personnel of the technical department of the enterprise. Organization of contracts with construction, repair and other organizations to ensure construction and repair work, utilities, for the organization of works on engineering and technical maintenance of equipment and instrumentation, maintenance of transport of oil and gas enterprises, other civil contracts (for the purchase of equipment, spare parts and consumables, etc.). Initiation of an investigation procedure for emergency incidents at the enterprise and informing the relevant health authority and law enforcement agencies about it. Organization of work and effective interaction of all structural divisions and production units of the enterprise. Organization and control of compliance with the requirements of the internal labor regulations, safety, labor protection, technical operation of devices, equipment and mechanisms. Organization of accounting and provision of reporting on the activities of the technical departments of the enterprise.

Automation .project development Designing a project for the reconstruction of electrical substations in the amount of 143 electrical substations of the ANPZ plant and designing the entire top-level SCADA at the plant. Selection of substation equipment Compilation of the BOM Contractor consultation and collaboration with Benatech LLP and PCN LLP 101 Consultation and training of employees on the operation of electrical equipment Implementation of the project for the technical accounting of electricity at the Atyrau Refinery Designing the project of the Access control and video surveillance system of the Atyrau Refinery Development, design of the Kaspi Bitum plant in Aktau. Designing of the ShNPZ plant in the city of Shymkent. Parameterization, development of commercial and technical accounting circuits Implementation of a number of TCO and NCOC Onshore Turnaround projects and the KPO project Revision and updating of drawings Author's supervision and expertise of projects at NCOC and Atyrau Refinery Review design specifications Knowledge of hazardous area classification Managing and mentoring 15 junior engineers at KMG Automation

Management and replacement of the General Director of the company. Sale of technological equipment. Management of the production, economic and financial-economic part of the Company. Monitoring and development of all departments of the company. Logistics management of the company. Personnel management and their training and motivation. Development of the entire Business process of the company, conclusion of contracts. Maintaining the company's image at a high level.

Design of low-voltage and high-voltage systems Design of open and closed open device 220/110/35/10 kV Working with SAP ERP software Working with ETAP Software Download Flow Calculation of settings for protection equipment for electrical equipment of transformers, generators, power lines 220/110kV Selects equipment and materials during design and, if necessary, during major repairs, compiles BOM and enters data into SAP for proper orders of materials and equipment Procurement and operations department consulting get involved and cause commissioning Selection and preparation of specifications Checking and commenting on documentation Control over labor safety in the design and repair of electrical equipment Substitution of the Director of the RPA Department and making independent decisions in the field of design and operation and in work with contractors Construction Technical analysis of vector charts Follows, develops and designs electrical circuits, and also controls the actualization of projects. Development of the project of instrumentation and automation (if necessary) Strict control of contracting design institutes at the facilities for the correct design Maintenance and adjustment of SCADA Maintenance of equipment in oil companies Design of modernization drawings for TCO and Western Energy Hub Maintenance of technical documentation for the work performed. Conducting targeted briefings on labor protection for team members. Ensuring the correct use of the necessary protective equipment, tools, inventory and fixtures. Implementation of constant supervision of employees during maintenance and repair of relay protection and automation devices. Establishing production targets for team members when carrying out work on complex relay protection devices. Formation of applications for the purchase of equipment, instruments, relay protection and automation devices, spare parts, testing facilities, tools, control cables, fixtures, materials, including in terms of emergency stocks. Verification, upon admission, of the compliance of the prepared workplace with the instructions of the order or order, as well as control of the adoption of additional safety measures required by the conditions of work Control before starting work on the side or order of the availability, completeness of the necessary protective equipment, devices, guarding devices, tools, control and safety devices. Supervision over the operation of complex relay protection and automation devices during construction and installation and commissioning. Acceptance of complex relay protection and automation devices after maintenance and repair from contractors. Coordination of starting circuits of newly switched on relay protection and automation devices. Collection of information about the trial operation of new and reconstructed relay protection and automation devices. Submission of proposals for the development, purchase and implementation of new types of relay protection and automation devices. Implementation of incoming control of new equipment. Coordination of applications for reconstruction and modernization of relay protection and automation devices. Preparation of laboratory, field and system tests of relay protection devices. Management of complex operational tests of relay protection and automation. Development of plans and programs for maintenance, repair and modernization of relay protection systems. Taking measures against the possibility of influence of the tested relay protection device on other devices. Implementation of admission to work on maintenance and repair of relay protection and automation devices of repair teams. Formation of work schedules for maintenance and repair of relay protection and automation devices and ensuring their implementation.

Maintenance of substations 220/110/35/10 kV Inder, Atyrau, Kulsary, Tengiz, Beineu; Design and development of circuits Organizes work on the technical operation and repair of instrumentation (instrumentation and automation), communication facilities, equipment and ensures their uninterrupted operation. Draws up schedules for scheduled preventive maintenance and maintenance of instrumentation, communication facilities, equipment and ensures their implementation. Organizes the repair of devices that are faulty or rejected during state calibration. Ensures their timely verification in the standards bodies in accordance with the regulation. Organizes work on installation, testing and commissioning of instrumentation, communication facilities and equipment. Controls the quality and timing of maintenance work, operating modes and conditions. Organizes systematic control, repair and maintenance of equipment, rationalization and inventive work, the introduction of scientific achievements and best practices in the operation, installation, maintenance of instrumentation and automation. Draws up the necessary accounting and reporting documentation. Monitors compliance with the rules and regulations for labor protection and fire safety. Provides assistance and cooperates with the employer in ensuring healthy and safe working conditions, immediately informs the immediate supervisor of each case of industrial injuries and occupational diseases, as well as emergencies that pose a threat to health and life for him and others, discovered deficiencies and violations of safety labor. Takes the necessary measures to limit the development of an emergency situation and its elimination, provides first aid to the victim, takes measures to call an ambulance, emergency services, fire brigade - Participation in the modernization of secondary circuits at SS-220kV Inder, Atyrau, Beineu; - participation in projects; - Work with relay protection devices, on an electromagnetic and microprocessor base: - Work with devices UPZ 512,513,514, Megohmmeters METRISIO 5000, Omicron 356, 256, Retom 11,41,51 Removal of CVC. -Participated in the preventive control of the relay protection panels based on the microprocessor: - In 2013, he took part in the modernization of the primary equipment of the NPG at the Substation "Inder", current transformers, surge arresters, 110kV / 10kV circuit breakers - Work with technical documentation, drawing up protocols and defective acts. - Development and implementation of forms for switching on ATDTsTN 6300 220/110/10 kV Autotransformers, 220kV, 110, 10 kV transmission lines -Participation in difficult switching; -Analysis of emergency and post-emergency events, work with SMIU (Sicam SAS). -Working an emergency event recorder (RAS)

Testing, checking and adjusting the maximum current and earth protection, undervoltage protection of cables, earth fault protection. Checking panel instrumentation. Checking and testing of switches and circuit breakers. High voltage testing of power and measuring transformers, power equipment. Revision and adjustment of all automation schemes. Adjustment and revision of equipment and relays of automation circuits. Reinstallation of automation and control circuits in the conditions of an operating substation. Repair and adjustment of all types of devices and relays with an accuracy class of up to one. Inspection of telecontrol schemes. Setting up sensors and telecontrol devices. Repair and adjustment of temperature sensors and thermal relays. Measuring and testing equipment; characteristics and basic parameters of relay protection; rules for reading contact diagrams of relay protection and automation; device and types of equipment used in automation schemes; technical conditions for the operation of automation schemes; the principle of telecontrol operation. Maintenance of substations 220/110/35/10 kV Inder, Atyrau, Kulsary, Tengiz, Beineu; Participation in the modernization of secondary circuits at SS-220kV Inder, Atyrau, Beineu; Participation in projects; Working with relay protection devices, on an electromagnetic and microprocessor base: Working with devices UPZ 512,513,514, Megohmmeters METRISIO 5000, Omicron 356, 256, Retom 11,41,51 Removal of CVC. Participation in preventive control of Relay Protection and Automation Panels based on a microprocessor: - Work with technical documentation, drawing up protocols and defective acts. Development and execution of forms for switching on ATDTsTN 6300 220/110/10 kV Autotransformers, 220kV, 110, 10 kV transmission lines Participation in complex switchings; Analysis of emergency and post-emergency events, work with SMIU (Sicam SAS). prof. maintenance and restoration, work with microprocessor devices SIEMENS, technical maintenance of terminals 7SJ, 7SA, 7SS, 6MD, RECPROTEC, SicamSAS, control of the executive scheme, documentation, work with schemes, supervision and maintenance, management and development of projects of the section of instrumentation and protection equipment Development of draft, technical and working projects. Technical calculations for projects, analysis of the effectiveness of designed structures. Design of complete transformer substations Design of switchgear cells, KSO, etc .; Design of DC auxiliary switchboards, etc. Coordination of projects. Testing, checking and setting the maximum current and earth protection, undervoltage protection of cables, earth fault protection. Checking panel instrumentation. Checking and testing of switches and circuit breakers. High voltage testing of power and measuring transformers, power equipment. Revision and adjustment of all automation schemes. Adjustment and revision of equipment and relays of automation circuits. Reinstallation of automation and control circuits in the conditions of an operating substation. Repair and adjustment of all types of devices and relays with an accuracy class of up to one. Inspection of telecontrol schemes. Setting up sensors and telecontrol devices. Repair and adjustment of temperature sensors and thermal relays. Measuring and testing equipment; characteristics and basic parameters of relay protection; rules for reading contact circuits of relay protection and automation; device and types of equipment used in automation schemes; technical conditions for the operation of automation schemes; the principle of telecontrol operation.

Repair with partial replacement of equipment, installation, dismantling, preventive maintenance, adjustment and adjustment of electrical equipment and equipment of open and closed switchgears with voltage up to 35 kV, dismantling, repair and installation of cable lines, cable equipment input devices with voltage up to 35 kV. Technical inspection and repair of power two-winding transformers with a capacity of up to 40,000 kV. And with voltage up to 110-220 kV, measuring transformers with voltage up to 35 kV, furnace and welding dry and oil transformers with power up to 6300 kV. And with voltage up to 35 kV. Current and major repairs according to the standard nomenclature of hydrogenerators and their pathogens, converters. Disassembly, replacement of faulty parts, reinforcement, vacuum drying, filling leaking oil-filled bushings with transformer oil with voltage up to 110-220 kV. Revision of reactors, arc suppression coils, power transformers without core drilling. Insulation measurement of tension strings of open switchgear. Connection of copper, aluminum wires by pressing and crimping. Drawing up sketches, drawings and diagrams for simple units of electrical machines. Performing complex locksmith operations with processing according to 7-10 qualities (2-3 classes of accuracy) with adjustment and fine-tuning. Repair of compressor installations. Selection of the necessary rigging for lifting and moving units and parts of equipment; work with the help of lifting machines and mechanisms, special devices. Elements of construction of electrical equipment of hydroelectric power plants, methods of work and sequence of operations during disassembly, repair and assembly according to the standard nomenclature of electrical equipment of switchgear with voltage up to 110 kV, in the manufacture of windings and insulation for transformers with insulation class up to 110 kV, during the repair, installation and dismantling of power cables, end and connecting couplings, apparatus and equipment of feeder and transformer substations, cable networks up to 35 kV; the most typical damage, ways to identify and eliminate them; circuits of electric machines depending on the method of their excitation; the purpose of the rotary bandages, the brands of brushes and their area of ​​application; fit of cylindrical joints and their designations; basic information on preventive tests of electrical equipment, methods of their implementation and test equipment; purpose and construction of thermosyphon and air filters and simple nitrogen protection devices for oil transformers, oil reactors; purpose and design of cable equipment and input devices of power cables with voltage up to 110-220 kV, connecting, stop and end couplings of various designs for outdoor and indoor installations; methods of connecting and terminating current-carrying conductors of cables; general information about gas-filled cables; a diagram of the cable network of the site and input devices; permissible current loads for cable lines in operating conditions; technological process of laying cables on the route of existing cables; varieties of transitions in the frontal parts of the windings with multi-parallel conductors in a turn; diagrams of stators, rotors and armature windings; signaling when performing rigging work; calculation of permissible loads on the rigging equipment; methods and timing of testing rigging, protective devices and insulating devices; rules and techniques of climbing work and work under tension; organization of climbing and slinging work; fundamentals of electrical engineering and mechanics.