• Factory Acceptance Test for PLC and SIS systems: Allen Bradley controllers, RSLogix 5000, SIL controller HIMA Hq41/Hq51, HiQardX, • Hydraulic and Pneumatic Systems Factory Acceptance Test (FAT) for TengizChevroil Oil Wellheads.

Kazakhstan, Asian Gas Pipeline Line A&B, Compressor stations CS6. • Ignition system troubleshooting works of turbines SGT-A35 (Industrial RB211) Unison Remote Ignition Controller/ Exciter Motherboard, Switching Module, Capacitor Module and Cables troubleshooting.

Azerbaijan, Sangachal Terminal, Rolls-Royce RT62 Power Turbine 50K Maintenance. • Installed new the journal and thrust bearings, removed the shipping bearings, installed the vibration and shaft position detectors, connected the bearing RTD leads, and checked the second stage blade tip clearance. Installing RTD Conduit Seal According to RR Global Engineering Method GEM 0085. Package Commissioning, Startup, Testing and handing over to the client

-Implement and evaluate system safety programs such us HIMA SILworx, HIMA ELOPII, Honeywell Safety Manager, Honeywell FSC Navigator -Evaluate all program documents and resolve all safety issues and coordinate with system assurance manager to analyze all safety requirements. -Participate in various safety regulations and recommend modifications to existing design and ensure compliance to all organization requirements and administer all human safety. -Analyze and perform assessment on all safety hazards and recommend improvements to all human factor engineering processes and ensure optimal integration of safety features on designs and Provide required training to same and ensure compliance to all customer requirements. -Develop integrated system analysis plans. -Coordinate with system and software engineering process for all user cases and determine all software safety requirements and prepare required presentation for all safety evaluation meetings. -Develop and participate in all test activities and ensure compliance to all safety requirements and evaluate all system engineering documents. -Perform required tests and monitor all work according to state and federal regulations. -Develop and implement all safety policies and procedures and coordinate with management staff to identify all risks and prepare reports for same. -Evaluate all system safety engineering requirements and coordinate with company engineers to maintain quality of all processes

Programming and troubleshooting PLC systems: Allen Bradley, RSLogix 5000, SCL500, SIL controllers (HIMA Hq41/Hq51), - Installation, programming and troubleshooting software: RSLogix5000, SCL500, RSLinx, DLR tool, Factory Talk View Studio, ELOP II. - programming and troubleshooting Industrial networks: Control Net, EtherNet\IP, DLR, Modbus TCP/EtherNet IP. -Inspection of installation automation process such as: Process Control/ESD/F&G philosophies/specifications, different type of instruments, I/O schedules, block diagrams, cause and effects, layouts, loop diagrams, etc.

Support Depot based activities to accomplish the repair and overhaul of General Electric and Siemens industrial gas turbines, ensuring that this work is carried out in accordance with the applicable OEM manuals, TCT specifications and procedures, and standard industry practices. - Perform in field maintenance, repairs, inspections, unit installations, commissioning, and any other in field service activities as required. - Monitor and maintain tooling and equipment. Ensure that this equipment is kept in a safe reliable working order. Remove from service any tool or equipment found to be defective. - Work with the Repair and Overhaul Project Managers to ensure that their objectives are met. - Assist with the set-up of a field service capability, providing operational and maintenance support. - Report on business development and field service issues/progress on a regular basis, as defined by the Manager, UK & European Operations. - Work with marketing, trading, and supply partners where necessary to achieve goals of TransCanada Turbines and assist in developing and improving customer relations wherever possible. This will include performing sales visits on behalf of the Manager, UK & European Operations and the Senior Vice President, Sales & Service. - Represent TransCanada Turbines in any and all activities, as requested by the Manager, UK & European Operations. - Increase knowledge of the HSE Policy and Manual and maintain a positive attitude towards the health and safety of myself and my coworkers. - Take ownership of HSE issues and demonstrate enthusiasm and support for HSE. - Other duties as directed by the Manager, UK & European Operations.

On the 6th of May 2014 Rolls-Royce announced an agreement to sell its Energy gas turbine and compressor systems business to Siemens. Siemens is a global powerhouse positioned along the electrification value chain – from power generation, transmission and distribution to smart grid solutions and the efficient application of electrical energy. Key duties: - Installation of Siemens (Rolls-Royce RB211) Power turbine RT62 ; - Installation of Siemens (Rolls-Royce RB211) aero derivative Gas Generator RB211-24G DLE - Installation of Siemens (Rolls-Royce RB211) centrifugal pipeline compressor RF2BB36 ; - Installation and testing program and PLC systems: Allen Bradley, Woodward Netcon, MicroNet Plus, Entronic control systems and RSLogix5000, RSLinx, Wonderware Intouch software. - Package assembly: - Process gas, seal gas, fuel gas, lube oil and auxiliary pipework installation; - Seal gas, process gas, fuel gas, auxiliary air, lube oil systems flushing/blowing, pressure test; - Centrifugal Compressor maintenance, Dry Gas Seal inspection/replacement, Bearings inspection/replacement. - Package Commissioning, Start up, Testing and handing over to the client;

Rolls-Royce is probably best known for making engines for the world’s biggest airliners and advanced military aircraft. However, we also produce low-emission power systems for ships - some of which we design ourselves - make critical equipment and safety systems for the nuclear industry and, power offshore platforms and major pipelines for the oil and gas industry. We support our customers with a global network of service centres. Key duties: • Responsible for field service Rolls-Royce Energy industrial gas turbines. • Providing field support to program and trouble-shoot PLC systems: Allen Bradley, Woodward Netcon, MicroNet Plus, Entronic control systems and RSLogix5000, RSLinx, Wonderware Intouch software. • Responsible for the successful field implementation of Siemens projects at customer facilities and is accountable for the safe and quality installation of the packaged systems delivered to the customer. • Comprehensive understanding of Industrial Gas Turbine (IGT) maintenance, repair and overhaul methodology & related processes as they apply to Siemens AGT (formerly Rolls-Royce Energy) RB211 aero derivative industrial gas turbines. • Provide on-site preventive maintenance, overhaul, repair and inspection services. • Proactively recognize electrical and mechanical faults and potential problems and take appropriate action to rectify problems • Responsible of engine and package system calibrations, troubleshooting and repair of instrumentation, electronic control systems and supporting mechanical equipment. • Understand and ensure site safety practises, policies and procedures.

Central Asia–China gas pipeline is the first pipeline to bring Central Asian natural gas to China and highlights China's quest for Central Asian energy exports. The whole pipeline is about 1,833 kilometres (1,139 mi) long, of which 188 kilometres (117 mi) in Turkmenistan and 530 kilometres (330 mi) in Uzbekistan. The diameter of the pipeline is 1,067 millimetres (42.0 in). It consists of three parallel lines with combined total capacity of 55 billion cubic metres per annum (1.9×1012 cu ft/a) which would be reached by 2015. Key duties: -Consult manufacturer's manuals, circuit diagrams and blueprints to determine tests and maintenance procedures for instruments used for measuring and controlling flow, level, pressure, temperature. -Inspect and test operation of instruments and systems to diagnose faults using pneumatic, electrical and electronic testing devices and precision measuring instruments -Repair and adjust system components, such as sensors, transmitters and programmable logic controllers, or remove and replace defective parts(Rockwell Automation, ABB, Bently Nevada) -Calibrate components and instruments according to manufacturers' specifications -Perform scheduled preventive maintenance work and complete test and maintenance reports -Install control and measurement instruments on existing and new plant equipment and processes

“KazTransOil” JSC is an owner of the largest network of main oil pipelines and waterlines in the Republic of Kazakhstan, total length of which amounts to 5 502,997 km of oil pipelines (with account of 71,7 km of “Kenkiyak - Orsk” oil pipeline, which passes through the territory of the Russian Federation and which is on the balance sheet of Representation of KazTransOil in Samara) and 2 148,1 km of water pipeline. Key duties: • administration and support of software and hardware software packages SCADA (OASys), servers and HMI SCADA (OASys) systems level of local control center and the regional control center, as well as other systems in the PLC (Rockwell Automation), Fire and Gas detection systems (Detronics), integrated in the system SCADA(OASys); • participation in the installation, testing, commissioning and acceptance in service process control systems to monitor the correctness of, and compliance with these works to the safety rules and regulations;

The 2,228 kilometres (1,384 mi) long pipeline runs from Atyrau in Kazakhstan to Alashankou in China's Xinjiang. The Kenkiyak-Atyrau section of the pipeline is 449 kilometres (279 mi) long and has a capacity of 120 thousand barrels per day (~6.0×106 t/a). Capacity of the pipeline maybe upgraded to 180 thousand barrels per day (~9.0×106 t/a) in the future. The pipeline was built and is operated by MunaiTas a joint venture between CNPC and KazMunayGas. Key duties: • Review and approval Design Documentation from EPC Contractor’s, design documentation from Design Institute for the Control System/SCADA/Instrumentation, Fire Alarm, Gas Alarm, Monitoring and Control System. • Perform audits, surveillance and inspection of all Control System/SCADA/Instrumentation activities of EPC Contractors to verify compliance with the technical requirements and to ensure that materials and equipment are in accordance with the specifications and contract requirements. • Leadership, supervision and coordination of engineering, factory acceptance tests, installation, pre-commissioning, commissioning teams as EPC Contractor, as PMC/Technical Consulting team member and as Owner representative.