Responsible to coordinate E&I Hazardous Area Equipment team (25 Inspectors) with daily tasks (such as witnessing MC and RFSU tests, check sheets completion), providing morning TBT’s and weekly knowledge sharing sessions. Interface between Client and BP execution teams to prevent delays on completion of punch list items, quality verification documents, Inspection test reports, Functional tests and others. Attracting Ex certified companies (such as EDIL-ORAL) to complete repairing activities of damaged Ex-equipment’s and instruments to keep alignment with IEC, EAC, RoK requirements. Witnessing with vendors (Baker Hughes, Siemens, Stahl, General Electric, ABB) in pre-commissioning & commissioning energization of gas turbine generators, PBF compressors, transfer pumps, motors, pressurized enclosures Interface with project design engineering team to solve & prevent serious Ex issues (prevent gas migration to power suppliers) with ignitors on Flares, Thermal oxidizers, Boilers, and others. Responsible for the coordination and delivery of client quality assurance measures of E&I Explosion Protection Equipment (Ex). Daily supervision of QC Ex inspection team (25 persons). Work closely with construction & Engineering teams to ensure all Ex-inspections are captured in line with schedule while maintaining compliance with all relevant standards and procedures. (e.g., IEC60079) Responsible for the final review and sign off Inspection & Test Reports related to Ex Equipment. (61,000 completed across project). Support and assist the punch list close out team to ensure punch list items are closed correctly in line with project schedules. Verify and document that all company and contractor personnel associated to Ex equipment management activities are competent as per the project requirements. Support project engineering teams with information required for the project Hazardous Area Equipment Register.

 Ensure all the Electrical, Instrumentation, Telecommunications, Fire and Gas & HVAC Equipment’s installed comply with the IEC 60079-14 & IEC 60079-17 and Client Standards for compliance with all applicable Codes, Specification, Quality Assurance and Quality Control Standards.  Performed Grade of Inspection Detailed and complete the Ex Inspection QVD with no outstanding punch list items for prior to Energization for all the potentially explosive equipment’s.  Performed surveillance activities during installation of all Electrical, Instrument, Fire and Gas, HVAC and Telecommunications Equipment’s and recorded punch list, report any anomalies and abnormalities discovered between the equipment’s as per IEC 60079 requirement and client’s specification. Coordinate with Site E & I Supervisors, Engineers and Vendors as well for the possible techniques and for corrective actions in resolving the related problems and also for the documents and drawings that are not available on site and in the documentation.  To access the condition of Electrical, Instrumentation, Telecommunications, Fire and Gas & HVAC Equipment’s installations in hazardous areas to ensure that it is installed and is maintained in a satisfactory condition.  Technically literate Kazakhstan PUE RK Rules for Electrical Installations. 2015

 Inspection of installation all Electrical, Instrument and Telecom works according to project specification, standards, procedure, GOST’s and PUE.  Daily surveillance of construction works and issuing IR’s, NCR’s and Daily reports.  Inspection for closure of ITR’s and Punch lists  Participation on Mechanical Completion Walkdowns  Planning and coordinate involvement in Mechanical Completion activities  Leadership on all matters relating to Mechanical completion.  Assist projects in planning and development of Systems Completion Plans  Providing daily, weekly as well as monthly reports as required by the project.  Punch list monitoring and priority compliance up to Handover.  Construction and Commissioning punch list clearance to meet project milestones.  Monitoring that punch lists items are accurate and properly filed and properly categorized(A,B,C)  Material receiving inspections for all Electrical, Instrument and Telecom equipment according to project specification, standards, data sheets, GOST’s and PUE.  General HSE follow-up and monitoring

 Inspection of installation all Electrical, Instrument and Telecom works according to project specification, standards, procedure, GOST’s and PUE.  Daily surveillance of construction works and issuing IR’s, NCR’s and Daily reports.  Inspection for closure of ITR’s and Punch lists  Participation on Mechanical Completion Walkdowns  Planning and coordinate involvement in Mechanical Completion activities  Leadership on all matters relating to Mechanical completion.  Assist projects in planning and development of Systems Completion Plans  Providing daily, weekly as well as monthly reports as required by the project.  Punch list monitoring and priority compliance up to Handover.  Construction and Commissioning punch list clearance to meet project milestones.  Monitoring that punch lists items are accurate and properly filed and properly categorized(A,B,C)  Material receiving inspections for all Electrical, Instrument and Telecom equipment according to project specification, standards, data sheets, GOST’s and PUE.  General HSE follow-up and monitoring

 Material receiving inspections for all Electrical, Instrument and Telecom equipment according to project specification, standards, data sheets, GOST’s and PUE.  Inspection of installation all Electrical, Instrument and Telecom works according to project specification, standards, procedure, GOST’s and PUE.  Daily surveillance of construction works and issuing IR’s, NCR’s and Daily reports.  Inspection for closure of ITR’s and Punch lists  Participation on Mechanical Completion Walkdowns  Planning and coordinate involvement in Mechanical Completion activities  Leadership on all matters relating to Mechanical completion.  Assist projects in planning and development of Systems Completion Plans  Providing daily, weekly as well as monthly reports as required by the project.  Punch list monitoring and priority compliance up to Handover.  Construction and Commissioning punch list clearance to meet project milestones.  Monitoring that punch lists items are accurate and properly filed and properly categorized (A,B,C)  Schedules Construction Walk Downs in liaison with the Project Construction, Turnover and Contractor based on Contractor's Walk Down Notice  Organizes Final Construction Walkdowns in coordination with the Project Construction, Turnover Coordinators and Punch Coordinators based on Contractor MC Notifications and Project Construction schedules  Supports the Project Construction for Pre-Hydro and 90% walk downs when required.  Ensures that scope relevant to engineering drawings and system boundaries are available along with other requirements before Walk Downs.  Facilitates a pre-walk down meeting to ensure all participants are aligned with the scope and expected outcome of the walk down as detailed in the Punch List procedure.  Facilitates a post walk down meeting following the completion of the walk down to categorize identified items and finalize the punch list as detailed in the Punch List procedure  Interfaces with Punch Coordinator(s) to ensure punch items are input into MCPlus from 100% Construction walk downs. Assists Construction & Turnover teams as needed to ensure punch items being corrected and closed out in timely manner.  Familiarity with POL system to be able to download as-built drawings and other Construction data  General understanding of the MCPlus system and support the Turnover Team to ensure accurate Walkdown Punch Items List is available in the system  General HSE follow-up and monitoring

 Carrying out of visual inspection on places of electrical & instrument installation works. Preparing of official reports by results of inspection;  Full control over the performance of work and tasks to eliminate comments  (punch lists):  Material receiving inspections at the customer's warehouse (cable trays, cable drums, glands, etc.) as per packing lists, purchase orders and datasheets;  Control over the work of installation of cable ladders/trays, laying of all types of cables in trenches and trays as per the project specification and relevant drawings:  Inspection of installation electrical/instrument equipment's al site;  Inspect all Construction Activities and Testing in Compliance to Project. Specification with witness by client Representatives.  Witnessed cable testing and loop checking.  Prepare Documentation Report regarding Testing and Inspection submit to Client. • Supervised for the Installation of Instruments (Pressure/ Temperature Indicator Transmitters from, level indicator Transmitters and Level Switches from) for the replacement of existing instruments.  Issuance of acts in case of its unavailability to Project Requirements.  Provide surveillance report as per project specification.  Installation inspection of power equipment and control and power cables laying.  Preparation and issuance of acceptance documentations for all listed works.  Development, preparation and technical documents selection (protocols and acts for laying, installation and inspection of cables and completed equipment) for further commissioning. FIELD INSPECTION  Inspection of LV Stahl Distribution Boards, Motors, Heaters, Fire & Gas systems Drager gas point detectors, toxic gas detectors, oxygen gas detectors, smoke detectors, Telecom system door limit switches, badge readers, manual alarm call points, ESD systems, Instrumentation inspections of Yokogawa/Rosemount/ABB temperature transmitters, pressure transmitters, flow & level transmitters, solenoid & actuators etc.  Inspection of cable trench as drawing  Inspection of cables pulling and cable continuity & IR test at drum level.  Inspection of sand bedding, duct bank & cable schedules.  Inspection of Glanding & Terminations as Client/Vendor’s termination drawing.  Material receiving inspection of all field mounted instrument and panel.  Inspection of the cable tray/conduit for primary and secondary cables. SUPERVISE OF FIELD ACTIVITIES  Fabrication of panels, junction Boxes, Local Control Panels  Installation of Panels, Junction Boxes, Local Control Panels  Instruments calibration works  Instrument Installation  Cable Trenching, cable laying  Cable Glanding & Termination works  Loop Checking / Pre-commissioning

 Inspection of Instrumentation equipment, distribution boxes, stuffing box seals (gland); Instrument, electrical, communication, low-voltage cables, coupling and terminal boxes. Inspection equipment, electrical and Instrumentation, junction boxes, gland seals (gland), cables Equipment, electric cables, cable trays, communication cables, low-voltage connecting terminal and couplings according to GOST and SNiP requirements of the projects. FIELD INSPECTION  Inspection of LV Stahl Distribution Boards, Motors, Heaters, Fire & Gas systems Drager gas point detectors, toxic gas detectors, oxygen gas detectors, smoke detectors, Telecom system door limit switches, badge readers, manual alarm call points, ESD systems, Instrumentation inspections of Yokogawa/Rosemount/ABB temperature transmitters, pressure transmitters, flow & level transmitters, solenoid & actuators etc.  Inspection of cable trench as drawing  Inspection of cables pulling and cable continuity & IR test at drum level.  Inspection of sand bedding, duct bank & cable schedules.  Inspection of Glanding & Terminations as Client/Vendor’s termination drawing.  Material receiving inspection of all field mounted instrument and panel.  Inspection of the cable tray/conduit for primary and secondary cables. SUPERVISE OF FIELD ACTIVITIES  Fabrication of panels, junction Boxes, Local Control Panels  Installation of Panels, Junction Boxes, Local Control Panels  Instruments calibration works  Instrument Installation  Cable Trenching, cable laying  Cable Glanding & Termination works  Loop Checking / Pre-commissioning

 Testing and commissioning, maintaining power line, searching and replacing faulty and harmful wires, to look after new wiring installation at new sites, dismantling and reassembling faulty and non-working electrical equipment’s, to find the roots of electrical problems and repair them.  Performs acceptance as well as performance tests under direction of engineering personnel to evaluate performance of new operating equipment  Repairs or replaces blown fuses defective switches or wires  Opens switches to deenergize station circuitry distribution lines preparatory to repairs by maintenance workers or line crews  Completions of ROK documentation acts, protocols (VSN, SNIP,GOST,PUE)