Supervision of installation, testing and start-up of Heat Tracing Systems (self-regulating, power limiting) by Subcontractors. Commissioning activities (work with NGC-20, NGC-30, NGC-40 Controllers, EHT Control & Monitoring Panel). Work with project documentation (P&ID, isometrics, single-line diagrams, principal schemes, and etc.)

Responsible for carrying out commissioning works at the construction site. Ensuring compliance with commissioning work schedules, compliance with man-hours for the work performed. Review of design documentation to ensure compliance with the norms and rules of the Republic of Kazakhstan, the requirements of Kazminerals and international standards. Obtaining approvals from the operating group; commissioning of completed facilities. Cooperation with engineering for the preparation of documentation related to automated control and monitoring systems, structured communication systems. Supervision of commissioning works to ensure safe work execution, review and approval of work permits, analysis of planned works, hazard assessment and development of mitigation plans. Performed loop checks from the field up to the ICSS. Verified trip and alarm set points. Cause & effects dynamic testing. Investigate instrument faults. Work with DCS control systems, knowledge graphical user interfaces & PLC controllers and their implementation. Calibration of transmitters: ABB, Honeywell, Danfoss, Wika, Yokogawa, Siemens and etc.

Cold loop check and hot loop check, punch listing and witnessing vendor start-up for all equipment and instrumentation packages. Inspection and confirmation of instrument loop line as per loop diagram, and inspection of instruments location as per revision drawing. Commissioning and startup of CAT engines with gas compressors. Implementation of Plant Safety Procedure. Cause & effects dynamic testing. Investigate instrument faults. Work with DCS control systems, knowledge graphical user interfaces & PLC controllers and their implementation. Carried out pre-commissioning and commissioning activities as per the procedures and "Zhaikmunai" permit to work systems. Calibrate of Smart Instrument devices: Pressure, Temperature, Level, Flow transmitters. Initial inspection and stroking of Process Control Valves; Fault-finding of Instrument devices and Control valves; Worked in conjunction with other departments: Mechanical, Electrical

Supervision of installation, testing and start-up of Heat Tracing Systems (self-regulating, power limiting, STS) by Subcontractors. Commissioning activities (work with NGC-20/NGC-30 Controllers, UIT, CPZ EHT Control & Monitoring Panel). Work with project documentation (P&ID, isometrics, single-line diagrams, principal schemes, and etc.)

Company “South Tambey lng”, Position: Instrument Supervisor Yamal LNG Project Subcontractor coordination with regards to their daily activities, monitoring of work progress in accordance with their submitted work schedule, monitoring Site work to make sure Subcontractor complies with aspects of work in accordance with Quality, Construction drawings and HSE requirements, preparing and review application/test report of Loop Test, attending pre-commission work, make as built drawing if necessary. Instrument Inspection & Plant Commissioning – In-charge of plant commissioning and maintenance shutdown operations supervision of various plant O&M instrumentation technicians. Responsible in Instrument field inspection. Cold loop check and hot loop check, punch listing and witnessing vendor start-up for all equipment and instrumentation packages. Inspection and confirmation of instrument loop line as per loop diagram, and inspection of instruments location as per revision drawing. Review and evaluation of all vendors proposed ITP (Inspection Test Plan). Inspection of instrument line and connections from field instrument to SIS, FGS marshalling panel. Assigned in activation and functional evaluation of DCS, HMI, ESD, PSD, PCS and F&G systems and controls. Commissioning and startup of GE GT MS7001EA and LP MR, PR, HP MR Compressors. Implementation of Plant Safety Procedure. Cause & effects dynamic testing. Investigate instrument faults. Work with DCS control systems, knowledge graphical user interfaces & PLC controllers and their implementation.

Carried out pre-commissioning and commissioning activities as per the procedures and AGIP KCO permit to work systems. Calibrate of Smart Instrument devices: Pressure, Temperature, Level, Flow transmitters. Initial inspection and stroking of Process Control Valves; Fault-finding of Instrument devices and Control valves; Performed field bus, spur checking. Assisted to Emerson during the fault finding. Performed loop checks from the field up to the ICSS. Verified trip and alarm set points. Worked with the instrument and F&G drawings: Loop Drawings, Data Sheets, Hook-ups, Layouts Worked in conjunction with other departments: Mechanical, Electrical Carried out F&G activities: Loop checking; Fault finding; Carried out tri and bi party walk downs; Cleared punch list items.

Development of projects for electrical and instrumentation: designing distribution networks. The calculation and selection of the necessary materials and equipment. Design of heating of conduits and reservoirs. Design, calculation and selection of materials for lighting systems. Calculation and selection of instrumentation and automation according to Standards TCO. Design Pulse, drainage and sampling equipment lines

Development of projects for electrical and instrumentation: designing distribution networks. The calculation and selection of the necessary materials and equipment. Design of heating of conduits and reservoirs. Design, calculation and selection of materials for lighting systems. Calculation and selection of instrumentation and automation according to Standards TCO. Design Pulse, drainage and sampling equipment lines

Carried out pre-commissioning and commissioning activities as per the procedures and AGIP KCO permit to work systems. Calibrate of Smart Instrument devices: Pressure, Temperature, Level, Flow transmitters. Initial inspection and stroking of Process Control Valves; Fault-finding of Instrument devices and Control valves; Performed field bus, spur checking. Assisted to Emerson during the fault finding. Performed loop checks from the field up to the ICSS. Verified trip and alarm set points. Worked with the instrument and F&G drawings: Loop Drawings, Data Sheets, Hook-ups, Layouts Worked in conjunction with other departments: Mechanical, Electrical Carried out F&G activities: Loop checking; Fault finding; Carried out tri and bi party walk downs; Cleared punch list items.

Carried out pre-commissioning and commissioning activities as per the procedures and TCO (Tengizchevroil) permit to work systems. Calibrate of Smart Instrument devices: Pressure, Temperature, Level, Flow transmitters Initial inspection and stroking of Process Control Valves; Fault-finding of Instrument devices and Control valves; Performed field bus, spur checking. Performed loop checks from the field up to the ICSS. Verified trip and alarm set points Worked in conjunction with other departments: Mechanical, Electrical Carried out tri and bi party walk downs; Cleared punch list items. Assisted to SYDtop during the fault finding.