Project: Tengiz, TCO/FGP-WPMP 3GI. Responsible for supervising and coordinating site E&I inspection activities and surveying progress to ensure on-time completion of projects. Planning, control, and organization of the performing activities. Support all project groups in matters of quality assurance.

Project: Tengiz, TCO/FGP C&P Performing activities: Responsibility to conduct inspections of ongoing and completed work, incoming material inspection and testing according to Inspection and Test Plan to ensure compliance with project design specifications and drawings. Carrying out visual inspections, dimensional control, final inspection. Signing off Quality Verification Documents (Checklists, testing protocols) as appropriate to confirm the activities have been completed. Preparation of Surveillance reports and NCRs, inspection status reports for Quality Supervisor, including Project Weekly Quality Reports.

Project: Eskene West Railway Project, Karabatan, Kasakhstan. Company: NCOC NV. Supervising, Coordinate and monitor site activities which ongoing and under completion. Performed Visual and dimensioning checks on Electrical works and Electrical Equipment at site. This includes Electrical works on Switch gears, distribution panels, cable pulling monitoring, LV and MV cable jointing, grounding terminations to link boxes, Transformers installation and termination, small power, lighting, Trace Heating, Earthing system installation . Review of product specification, data sheet of contractor scope of supply material (like Cable trays, Power & control Cables, lighting fixtures, Lighting & power distribution boards, etc.) Reporting, update and check all Red line mark-up drawings done at site as per site condition & issuing to contractor for site execution. Resolve day to day queries raised by contractors. Proper co-ordination with design engineers at site. Supervision works schedule that is attainable within the target date prior to pre-commissioning handover. Assist vendor at site. Supervision that all construction checklists and punch items are closed accordingly prior to pre-commissioning.

• Development and implementation of quality assurance plans based of ISO standards; • Development of quality control procedures, inspection and test plans, method statements, workplace risk assessments; • Monitoring of compliance of design, engineering and technological disciplines, rules and regulations for the protection of health, safety, industrial hygiene and fire safety requirements of environmental, health authorities and technical supervision; • Monitoring the work of the company technical and construction departments, checking the company received material resources (raw materials, semi-finished products, components), preparation of conclusions on their compliance with quality standards, specifications and design decisions, monitoring of testing finished products, certifying the quality of works and services on the basis of inspections; • Preparation of a complaint in the presence of violation of the quality requirements by suppliers, work on the analysis of complaints, the investigation of the causes of defects and violations of production technology, the work quality degradation, to develop proposals for error cause removal; • Select the intended sub-contractors on the basis of the audit and control of their work; • Carrying out laboratory tests of electrical devices up to 1000 V and higher (Approved for testing and measurement of electrical equipment); • Preparation of as-built documentation, acts, checklists, test protocols based on the technical documentation of the RK and the customer's requirements; • Hand over of completed objects to work and state committee. Implemented project: • Construction of 35 kV overhead lines for the Locomotive Depot, 10 kV OHL Substation KEGOC – Siding 8, Modernization of the SS 220 Kulsary, installation of 10 kV substation at the Siding 8, Installation of a backup generator at the Siding 8, TCO project "CEP Rail Infrastructure", 2006-2007., • Construction of 35 kV overhead lines for the new CRL, TCO project, "Crude Export Project", 2006-2007., • Construction, power supply and commissioning of air quality monitoring stations (AQMC), Customer - Agip KCO, 2006-2008., • Maintenance of electrical overhead lines cable lines and, 110/10, 10/0.4kV electrical Substation at the Karabatan area, Customer - ESS / Agip KCO, 2006-2009, • Commissioning of Modules Shelters of the main pipeline, customer - Saipem 2008, • Installation of 110 kV cable line SS “Old City” - 12 SS, Client - KOCCK, 2008, • Installation of 10 kV substation 17 "South" - Distributing Point 32 Zhumysker, Customer - TCO, 2008-2009, • Installation of transformers 10/0.4 kV, 1.6 MW substations 9.2, 9.3 Karabatan, Customer - Agip KCO, 2009, • Completion of installation of 35/110 kV equipment, communication and dismantling work at the KEGOK SS 220kV Atyrau – PGP Karabatan, Client – Bateman Kazakhstan/Agip KCO, 2009-2011, • Engineering, procurement and construction of 110 kV overhead line AHPP-SS Nursaya with tie-in at SS Kok-Arna and SS Zhumysker, Customer – Construction Department of Atyrau regional Akimat , 2007-2011, • Engineering, procurement and construction of 10 kV overhead lines for the export oil pipeline, fuel and gas export pipelines, customer - Punj Lloyd Kazakhstan / Agip KCO, 2007-2011, • Purchase and delivery of electrical materials, customer - KPJV / TCO, 2014-2015, • Provision of preventive and corrective maintenance services of overhead lines, poles, and towers in Karabatan, Client – Ersai Caspian Contractor, 2014-2015.

Project - Construction and commissioning of Oily Water Treatment Plant, Phase 1 at the Koshanai base, Mangistau region. Client - NCPOC. The organization and management of construction (civil, mechanical, piping, E&I) and commissioning, supervision of current documentation, development of Method Statements, Inspection and Test Plans, workplace risk assessments, preparation and opening Permit to Work, preparation of as-built documentation, handover of the completed object to work committee.

The organization and management of construction of 0,4-110 kV Overhead Lines, pulling of electrical cable, installation of electrical equipment. Supervision of current documentation, development of Method Statements, Inspection and Test Plans, workplace risk assessments, preparation and opening Permit to Work, preparation of as-built documentation, handover of the completed object to work committee.

• Development of quality control procedures, inspection and test plans, method statements, workplace risk assessments; • Monitoring of compliance of design, engineering and technological disciplines, rules and regulations for the protection of health, safety, industrial hygiene and fire safety requirements of environmental, health authorities and technical supervision; • Monitoring the work of the company technical and construction departments, checking the company received material resources (raw materials, semi-finished products, components), preparation of conclusions on their compliance with quality standards, specifications and design decisions; • Carrying out of inspection of the executed works; • Preparation of as-built documentation, acts, checklists, test protocols based on the technical documentation of the RK and the customer's requirements;

Served as an auto mechanic, supply agent