Nov 2020 – Till Now Maire Tecnimont SPA. Position: Commissioning Mechanical Supervisor . Project AGPP ( Amurskiy Gas Process Plant ). Gazprom Project Amurskiy Region. Svobodniy. Russia Responsibilities: Carry out all activities such as flushing/blowing, reinstatement, leak test, motor run-in, machinery run-in, static equipment inspections, cleaning, internals installations, working with rotating equipment ( compressors , dosing pumps ( chemical injection packages), centrifugal pumps ( horizontal, vertical ) , alignment and etc.) , compressors, air coolers, blowers, HVAC, experience with PID drawings, GA( general arraignment ) drawings , Vendor drawings , and etc. • To implement the pre-commissioning and commissioning procedures for rotary equipment; • Execute with the assigned crew from the Sub Contractor all the activities pertaining to the discipline; • Ensure effective utilization of commissioning manpower and consumables; • Ensure the execution of Vendor’s specialists’ field activities with the assigned resources from the Sub Contractor as per Vendor’s representative plan; • Carry out the equipment inspection with Client representative as per the procedures and ensure proper certification is produced; • Prepare the forms for all the tests to be performed and ensure submission of the certificates, duly signed by involved parties for final hand over to the certification engineer (QA/QC); • Coordinate in field with the vendor representatives; • Keep record of all the activities carried out; • Ensuring the safety practices are strictly followed during the execution of activities; • Reporting the progress and constraints to the Mechanical Supervisor; • Can be the authorized person designated by the site manager to receive or issue a Permit to Work according to the project Permit to Work Procedure. • Assistance to supervisor for: o Expediting of pending Punch List Items in accordance with Commissioning Manager (CMM) o Coordination and supervision of Construction support activities during the performance of the pre-commissioning, commissioning activities.

May 2019 – Sep 2019 Maire Tecnimont SPA. Position: Commissioning Mechanical Supervisor . Project CORU ( Combine Oil Refinery Unit ) “ Euro+”. Gazprom Project Moscow Russia Responsibilities: Carry out all activities such as flushing/blowing, reinstatement, leak test, motor run-in, machinery run-in, static equipment inspections, cleaning, internals installations, working with rotating equipment ( compressors , dosing pumps ( chemical injection packages), centrifugal pumps ( horizontal, vertical ) , alignment and etc.) , compressors, air coolers, blowers, HVAC, experience with PID drawings, GA( general arraignment ) drawings , Vendor drawings , and etc. • To implement the pre-commissioning and commissioning procedures for rotary equipment; • Execute with the assigned crew from the Sub Contractor all the activities pertaining to the discipline; • Ensure effective utilization of commissioning manpower and consumables; • Ensure the execution of Vendor’s specialists’ field activities with the assigned resources from the Sub Contractor as per Vendor’s representative plan; • Carry out the equipment inspection with Client representative as per the procedures and ensure proper certification is produced; • Prepare the forms for all the tests to be performed and ensure submission of the certificates, duly signed by involved parties for final hand over to the certification engineer (QA/QC); • Coordinate in field with the vendor representatives; • Keep record of all the activities carried out; • Ensuring the safety practices are strictly followed during the execution of activities; • Reporting the progress and constraints to the Mechanical Supervisor; • Can be the authorized person designated by the site manager to receive or issue a Permit to Work according to the project Permit to Work Procedure. • Assistance to supervisor for: o Expediting of pending Punch List Items in accordance with Commissioning Manager (CMM) o Coordination and supervision of Construction support activities during the performance of the pre-commissioning, commissioning activities.

May 2018 – April 2019: Maire Tecnimont SPA. Position: Commissioning Mechanical Supervisor . Project. Al Dabbiya Surface Facilities Phase III U.A.E. Abu Dhabi. ADCO. Carry out all activities such as flushing/blowing, reinstatement, leak test, motor run-in, machinery run-in, static equipment inspections, cleaning, internals installations, working with rotating equipment ( compressors , dosing pumps ( chemical injection packages), centrifugal pumps ( horizontal, vertical ) , alignment and etc.) , compressors, air coolers, blowers, HVAC, experience with PID drawings, GA( general arraignment ) drawings , Vendor drawings , and etc. • To implement the pre-commissioning and commissioning procedures for rotary equipment; • Execute with the assigned crew from the Sub Contractor all the activities pertaining to the discipline; • Ensure effective utilization of commissioning manpower and consumables; • Ensure the execution of Vendor’s specialists’ field activities with the assigned resources from the Sub Contractor as per Vendor’s representative plan; • Carry out the equipment inspection with Client representative as per the procedures and ensure proper certification is produced; • Prepare the forms for all the tests to be performed and ensure submission of the certificates, duly signed by involved parties for final hand over to the certification engineer (QA/QC); • Coordinate in field with the vendor representatives; • Keep record of all the activities carried out; • Ensuring the safety practices are strictly followed during the execution of activities; • Reporting the progress and constraints to the Mechanical Supervisor; • Can be the authorized person designated by the site manager to receive or issue a Permit to Work according to the project Permit to Work Procedure. • Assistance to supervisor for: o Expediting of pending Punch List Items in accordance with Commissioning Manager (CMM) o Coordination and supervision of Construction support activities during the performance of the pre-commissioning, commissioning activities.

Position: Commissioning Mechanical Engineer. SD -2 ( Shah Daniz ) project. SD-2 platform at ATA ( Amec Tekfen Azfen) yard and Sangachal Terminal. • Responsible: Produce project specific procedures, Preservation & Maintenance check sheets, matrix and schedules. • Find out technical problems associated with rotating/static equipment and mechanical packages/valves are identified and resolved or coordinated with the respective vendor. • Preserve and maintain rotating equipment after equipment commissioning and start-up. • Preparation of RFQ’s and evaluation of vendor technical bids and preparation of technical bid analysis for all specialist services activities. • Assessing the requirements of special tools/temporary facilities/equipment required for pre commissioning and commissioning. • Reading PI&D, Plot plan, GA (vendor drawings), isometric and etc. drawings. • Participate in model reviews of the plant with respect to Accessibility & Maintainability requirements. • Perform & guide various activities related to rotating equipment likes lube oil flushing, alignment, lubrication, vibration checks, start-up etc. • Perform & guide various activities related to static equipment likes proper installation of internal inside the vessels as per drawing & specifications. • Perform & guide in air blowing, flushing, leak testing, drying & inerting of various piping. • Perform & guide in various activities such as mechanical interlock, pipeline pigging activities, spring support, hot & cold setting.

Manages technical relationships with key customers, including responding to technical enquiries by using SKF advance calculation tools and/or in relation with other departments in SKF. Handles technical complaints and managing technical risks. Responsible of internal projects. Develop the life cycle management process including seals and service competences. - To identify and analyse technical details of customer's requirements and to communicate these clearly and accurate to both the customer and the SKF organization; - To support application reviews on machines and equipment; - To work closely with the sales organization, contribute to opportunity generation and support the development of value added solutions; - To understand, use, interpret and verify results from engineering software to create value for customers; - To be responsible for customer relationship management at the engineering level; - To participate in the execution of Root Cause Analysis of the customers' application; - To support internal and external trainings; - To represent SKF and its products and services at customers and institutions through visits, presentations, seminars and fairs; - To follow management instructions and procedures; to report Environment Health and Safety (EHS) risks and EHS related incidents; to follow quality specifications and requirements, and identify quality risks and opportunities for improvement.

manages the team of technical professionals supporting sales of the company's products, solutions as well as services. Manages customer situations and designs strategies necessary to maximize customer satisfaction. Develops technical initiatives geared towards improving the effectiveness of the technical team. Assesses reward and coaches technical sales professionals within the organization. Provide support to front line sales people overseeing presentations, technical support together with customer presentations. Assist customers in the operation of their products and organize support for problems they may have.

Select the pumps, checked hydraulic datasheets for pumps, GA ( general arrangement) drawings, pumps curves, compressors ( air, gas), turbines, operate and maintain the rotating equipment. Responsible for BP Sangachal projects of Flowserve company pumps , AzMeCo ( Azerbaijan Methanol company) project for centrifugal, gear, screw pumps, steam turbine for centrifugal pumps, compressors, gears and all rotate equipment. Also operate and maintain. Knowledge standards as : API, ASME, ANSI, ISO. Experience in commissioning , installation , start up equipments. Experience of MAXIMO program.

I’ve got experience in solids control job (shale shakers, shaker screens, centrifuges, deciliters, decanters, degasser, centrifugal pumps, feed pumps, mud cleaners ) , filtration job, CRI (cutting re-injection) systems, de-watering job, Duster Dryer, Verti-G, CCB (Clean Cut Cutting Blower ) systems, vacuum units, and drilling waste management systems, maintenance equipment, installation equipment. I was worked in Gulf of Mexico (USA), Nigeria, Georgia, Sakhalin Island (Russia), North Sea (Scotland), Kazakhstan, Azerbaijan offshore rigs and onshore rigs. I was work for BP, Shell, Fonterra, Sakhalin energy, Rossneft, Agip, Total ELF, SOCAR , EXXON, Lukoil, Karasu operating company, Gobustan operating company. Responsibilities: Assist with the operation and maintenance of ES field equipment. Gain understanding of equipment function, also troubleshooting of equipment and products, pass this information to customer and rig personnel. Advise supervisor of any new competitive developments, products, pricing, servicing procedures and technical application or of increasing customer interest. Monitor the effectiveness of the company’s QHSE Management Procedures and ensure all legal and contractual requirements are fulfilled to the customer’s satisfaction. Maintain an active role in the identification of Opportunities for improvement in the company’s QHSE Management systems. Writing STOP cards, using TOFS system, attend all safety meetings, perform crew toolbox meetings. Work to vision of ZERO-ZERO-ZERO (Zero Accidents, Zero spills, Zero Fatalities). Familiarize and follow BP’ s “Golden Rules of Safety”. Dewatering job: Regular pilot testing of dewatering treatment to be pilot tested by Dewatering engineer in consultation with mud engineer to avoid excess polymer and flocculent in recovered water/ brine for mixing mud. Daily maintenance of that unit. Reported customer and project engineer recovered fluid volume and solids discarded to skips. Cutting Containment System: Regular inspection and testing of equipment as per operating guidelines. Daily maintenance , recording all numbers of drill cutting boxes, total weights of cuttings and containment mud should be reported customer and office by daily reports. To observe all rules QHSE. Solids Control Equipment: Daily inspection and maintenance solids control equipment, check discard, mud weight before centrifuges and after. Check the shale shakers, shaker screens, centrifuges, deciliters, decanters, degasser, centrifugal pumps, feed pumps, mud cleaners. All volumes and weights of mud and solids discharge recorded for centrifuge systems included in Daily Report. Azerbaijan: I was working on Central Azeri, West Azeri, East Azeri, Shah Deniz, Chirag, Istiglal, Dada Gorgud platforms for BP. LIDER or Heydar Aliyev platform (Maersk company rig) for EXXON, JAOC, Lukoil. Onshore rigs – for SOCAR, Karasu operating company, Gobustan operating company. Georgia for Fronterra: Sakhalin Island – for Rossneft and BP: Nigeria- for BP. Gulf of Mexico – for BP, Shell, EXXON: Kazakhstan- for AGIP.

Repairing all rig equipment and daily maintenance. Experience working on Diesel engines ( Wartsila V12), CAT. Maintenance: Generators, Air Compressors, mud pumps, cranes, drawworks, agitators, BOP, Top drive, air taggers, sea water pumps, centrifugal pumps and etc. I was working on Trident 20 which was built in Baku. Caspian Sea (Azerbaijan territory) for EXXON, Total ELF, JAOC. Kazakhstan: for Agip.

Made all views of logging (gamma ray, neutron, electric and etc.) I was work in Azerbaijan.