Visual Inspection (VT): Performed comprehensive visual assessments of completed welds to identify surface discontinuities such as undercut, porosity, and overlap. Weld Geometry Validation: Verified weld reinforcement heights, leg lengths, and throat thicknesses using specialized gauges (Hi-Lo, Bridge Cam, etc.). Non-Conformance Management: Formally rejected non-compliant weldments and oversaw the repair process to ensure rectification met client quality standards. Acted as the Client Quality Representative for final NDT report validation; reviewed and counter-signed all inspection records to authorize project milestones and mechanical completion. Pressure Testing Validation: Witnessed and verified the integrity of piping systems and pressure vessels during hydro and pneumatic testing. Safety & Compliance: Ensured all tests were conducted according to approved P&IDs, test packages, and safety protocols (including exclusion zones for pneumatic testing). Instrument Verification: Confirmed the calibration and accuracy of pressure gauges and chart recorders before authorizing the start of tests. Acting as the final technical expert in the review and approval of Fabrication Record Books (FRBs) and Site Quality Dossiers (SQDs), ensures that documentation is free from defects and fully complies with regulatory and contractual requirements. Verified that all material certificates, NDT reports, welding logs, and pressure test certificates were complete and compliant, authorizing the final transfer of assets to the operations team. Cross-Discipline Inspection: Client-side oversight of Painting, Insulation, and Electrical work.

Assisted in contribution to the systematic management of safety, health, environment, reliability and efficiency to achieve world-class performance which is in support of TCO Operational Excellence strategy. Participated in Behavior Based Safety Program (BBS). Ensured Safety and Environmental compliance within FGP Turnover Group. Construction Walkdown Management: Carried-out Walkdowns in liaison with the Project Construction, Turnover and Contractor based on Contractor's Walk Down Notice Arranged Final Construction Walkdowns in coordination with the Project Construction, Turnover Coordinators and Punch Coordinators based on Contractor MC Notifications and Project Construction schedules. Supported the Project Construction for Pre-Hydro and 90% walkdowns when required. Ensured that scope was in line with the engineering drawings and system boundaries are available along with other requirements before Walk Downs. Facilitated pre-walkdown meetings to ensure all participants were aligned with the scope and expected outcome of the walkdown as detailed in the Punch List procedure. Facilitated a post walkdown meetings following the completion of the walkdown to categories identified items and finalize the punch list as detailed in the Punch List procedure Established communications with Punch Coordinator(s) to ensure punch items from Construction walkdowns were 100% uploaded into MCPlus. Supported Construction & Turnover teams as needed to ensure punch items being corrected and closed out in timely manner. Systems Technologies: Ensured familiarity with POL system to be able to download as-built drawings and other Construction data Obtained advanced understanding of the MCPlus system and supported the Turnover Team to ensure accurate Walkdown Punch Items List is available in the system Building Competencies & Performance Management: Liaised with Company and Contractor representatives to conduct timely Construction Walkdowns Liaised with Punch Coordinator for weekly updates of the punch list registers used for reporting to management Ensured spot checking of the Master Punch List binder to make sure the updates and status are correctly reflected. Communication: Instructed Walkdown Participants to ensure they clearly understood objective of the Walkdown and expected outcomes Participated in Project Construction Weekly Progress Meetings to update Construction and Contractor teams on the status of walkdowns and punch list clearing in support of Mechanical Completions Communicated the walkdowns schedule to the Turnover Team Reported the walkdown issues to the Project Construction and Turnover Management and Contractor

Ensured proper coordination of QVD files between the stakeholders (Operations, Maintenance, Quality Control, Civil) Provided clear reports to the Top Managment of the Company with regard to the established procedures and policies. Generated and compiled all data from the Stakeholders for subsequent input to the Company Dashboards. Kept technical registers and ensured their compliance with site activities. Participated in various meetings with both Managment and Contractors in order to share the work results on daily, weekly and monthly basis.

 Welding inspection  Monitoring welding activities  Verification of drawing revision, welders qualification, applied welding procedure specification, welding consumable identity in compliance with WPS, base material identity in compliance with drawing, calibration of welding equipment & inspection instruments, method of bevel preparation, level and method of pre-heat applied prior to welding and tacking, fit-up, alignment, pre-welding distortion control, welding process and all related variable parameters (voltage, amperage, travel speed etc.), welding and/or purging gases (type, pressure/flow), oxygen content inside gas chamber to avoid oxidation of root pass, interpass temperature etc.;

 Preparation of Method Statements, work instructions, QAP/ITP and all procedures related to QA/QC  Conduct all stage-wise Inspection as per approved QCP/ITP with Client, Owner & Third Party  Visual Inspection and reporting of piping weld joints for materials like CS, SS, Alloy Steel, Cu-Ni & Inconel of different sizes (0,5 inch to 72 inches) as per ASME B31.3 standard  To conduct and evaluate non-destructive testing (RT, MPT, PT and UT) of weld joints as per ASME Section VIII acceptance standards  Interpretation of RT films as per ASME Section VIII Acceptance Standards  Implementation of approved procedures (WPS & PQR) and maintaining quality records as per quality management system requirements  Evaluation of pre & post weld heat treatment (PWHT) charts  Prepare inspection reports, NSR, TQ, weekly QA/QC reports and monthly X-Ray and repairing status  Circuit identification on P&ID`s for pressure test; and prepare Test Packages  Inspect lines in accordance with P&ID and isometric drawing for mechanical clearance  Issue Punch List follow-up  To conduct Hydro Test and Pneumatic test as per STD  Documentation of quality records as per ISO standards  Coordinate with other Departments, Client and Sub-contractors for the smooth functioning of QA/QC activities  Coordination in internal and external auditing  Manpower management and review interim and final documentation

Projects: Topside for EP Cluster 4​ within the Kashagan Experimental Project, with execution of works in "Temir At" yard. Duties and responsibilities:  Review QC documents, monitor and witness the stages of repair 2”, 3” and 6” Nickel Alloy high pressure process pipes (B444 NO6625GR.1) on Headers starting from material receiving, spooling, beveling.  Verify the correctness of welding consumables (electrodes, filler wires, consumable insert, gases etc.)  Verify dimensions, fit-up and weld preparations in accordance with specification, isometric drawing  Verify that required preheat is in accordance with the WPS  Monitoring all welding activities for Nickel Alloy high pressure steel pipes (B444 NO6625GR.1)  Visual inspection and dimensional check of completed weldment against specification requirements, codes and drawings.

 Comparison of production parameters with indicators specified in ASME, drawings, and technical documentation.  Products examined "by eye" or validated using test and measurement instruments and appliances: micrometers, calipers, gauges, magnifying glass, microscope, and electrical appliances.  Means of labor of "approved sample" and desirable features of high-quality products that are stored in its memory.  The controller receives a batch of finished products or semi-finished products, checks each of them, shall affix the stamp verification draws up the certificate accompanying documentation, defective statements, controller brings not only marriage, but also examines its causes and proposes measures for its prevention.  The reasons may be different: not regulated equipment, defective material defects blanks inadequate skills, carelessness, and inattention workers.  Qualified inspector knows the production technology, the process of work, understands the drawings, able to use the control, and measuring instruments.  Provide support in the development of (Integrity) Assurance processes and procedures for IPO  Execute the monthly findings status overview reporting.  Coordinate reporting of the department to IA and internal stakeholders.  Update the yearly IPO Assurance Plan.  Support IPO on any external audits/reviews conducted.  Developed memory, normal vision, stable visual efficiency, immunity, concentration, and attentiveness.  Exercise controller is negligible.

Projects: Emergency multi-discipline construction services Island A Duties and responsibilities:  Review QC documents, monitor and witness the stages of repair 2”, 3” and 6” Nickel Alloy high pressure process pipes (B444 NO6625GR.1) on Headers starting from material receiving, spooling, beveling.  Verify the correctness of welding consumables (electrodes, filler wires, consumable insert, gases etc.)  Verify dimensions, fit-up and weld preparations in accordance with specification, isometric drawing  Verify that required preheat is in accordance with the WPS  Monitoring all welding activities for Nickel Alloy high pressure steel pipes (B444 NO6625GR.1)  Visual inspection and dimensional check of completed weldment against specification requirements, codes and drawings.

 Identify quality control problems and, if necessary, recommend solutions and control measures to eliminate the problems and corrective actions;  Monitor for to whether the requirements of the approved procedures and inspection plans traceability Contractor material testing documentation / inspection;  To monitor compliance with the approved contractor safety rules, standards and procedures;  Monitor compliance of pipeline works contractors approved procedures, and conduct required examinations contractors nondestructive methods;  Hydro carried out by the contractor, to inspect the completeness and to assist in the preparation of defective statements of all unfinished work on the hydraulic test in accordance with the company's permission to test;  To conduct inspection and monitoring of hydraulic tests carried out by the contractor;  Monitor contractors completed work on the site and assisting in the preparation of defective statements of all outstanding work required to close the discipline / project section;  Create a close relationship personnel and contractors to assist in the implementation of the project quality requirements;  Explore Contractor packs to complete the mechanical work, to prepare lists of deficiencies unfinished works needed to complete the mechanical work packages to provide for the approval of the Company.

> Visually inspecting parts for defects or damage. > Determining the minimal requirements and procedures needed for a process to pass a QA inspection. > Carrying out final QA inspections. > Ensuring that adequate corrective measures are implemented in cases of noncompliance. > Advising technicians on technical or regulatory concerns. > Working from technical drawings. > Ensuring that all stakeholders have access to the Quality Control plan and approve of it. > Oversee the proper identification for all parts and components used in the production process. > Carrying out audits and inspections. > Conducting visual mechanical inspection of components. > Inspecting various maintenance actions. > Maintaining traceable records that can be used in audits. > Following all safety procedures.

> Comparison of production parameters with indicators specified in GOST, drawings, and technical documentation. > Products examined "by eye" or validated using test and measurement instruments and appliances: micrometers, calipers, gauges, magnifying glass, microscope, and electrical appliances. > Means of labor of "approved sample" and desirable features of high-quality products that are stored in its memory. > The controller receives a batch of finished products or semi-finished products, checks each of them, shall affix the stamp verification draws up the certificate accompanying documentation, defective statements, controller brings not only marriage, but also examines its causes and proposes measures for its prevention. > The reasons may be different: not regulated equipment, defective material defects blanks inadequate skills, carelessness, and inattention workers. > Qualified inspector knows the production technology, the process of work, understands the drawings, able to use the control, and measuring instruments. > Provide support in the development of (Integrity) Assurance processes and procedures for IPO > Execute the monthly findings status overview reporting. > Coordinate reporting of the department to IA and internal stakeholders. > Update the yearly IPO Assurance Plan. > Support IPO on any external audits/reviews conducted. > Developed memory, normal vision, stable visual efficiency, immunity, concentration, and attentiveness. > Exercise controller is negligible.

> Established for the purpose/s of supporting, administering the information database systems. > Providing instruction and advice to system users, analyzing problems and issues related to the information system software and other related software. > Coordinating usage among all system users. > Producing a variety of statistical reports and providing support to the administrative supervisor, ensuring compliance with legal and administrative requirements. > Good organizational skills for the multiple project task works. > Ability to work under pressure, strong time management and teamwork skills. > Leader in Safety and Environmental Performance. > Active participant in Behavior Based Safety Program (BBS). > Programming Skills: JavaScript. > Database Skills: MS Office, SAP, IMIS, and EDMS. The main functional responsibilities: * Entering data into ICS database for the preservation department. * Collect performed activities and providing weekly report. * Improvement of tagging of equipment. * Processes of documents and materials for the purpose of disseminating information and/or materials to appropriate parties. * Transfers and verifies of data between the personal computer and the mainframe. * Locating and correcting data entry errors, or report them to supervisors. * Atyrau, AKCO’s Frontier Plazapreparing PRESERVATION HANDOVER DOSSIERS.

> Certificate of tests in accordance with approved procedures of the project, international codes, and standards. > Visual inspection of assemblies for welding, weld monitoring, and visual inspections of weld profile in accordance with the approved WPSs/PQRs. > Radiographic analysis where it is applicable. > Certificate of Hydrostatic and pneumatic tests. > Visual inspection and measurements of DFT completed products. > Testimony test of Charpy. > Conducting inspections of painting and sand blasting. > Filling in the register of quality. > Issue reports to clients throughout the above processes.