- Planning, organizing, and coordinating all stages of the project lifecycle — from initiation to handover to the client - Developing project schedules and budgets; monitoring timelines, quality, and cost performance - Managing the project team and assigning tasks across engineering, construction, and QA/QC departments - Ensuring work execution in compliance with project documentation, regulatory requirements, technical specifications, and HSE standards - Coordinating with clients, contractors, and suppliers; conducting negotiations and maintaining technical correspondence - Managing project changes, performing risk analysis, and implementing corrective actions - Preparing weekly and monthly project status reports (Progress Reports)

Electrical and instrumentation inspector of the quality control department Drafting and reviewing quality documents such as procedures and ITPs. Ensuring compliance with quality plan requirements. Submitting notifications for inspections (NFI). Planning and conducting inspections in conjunction with customer representatives (KPO). Completing required inspection checklists (ITR) after satisfactorily complete inspection and issuing inspection reports for non-conformities. Preparation of certificates of completed works in accordance with SNiP and RK norms (certificates of concealed works, certificates of technical readiness of electrical installation works, certificates of completion of works on installation of automation systems).

Work with ITP for emergency and deterioration works. Inspections of all electrical installation works. Verification, signing and uploading of QVDs (checklists and certificates). Knowledge of all QVD matrices for E&I work. Making changes to design drawings (red line markings) RFI, TQ issue (design changes). Preparation of turnaround files. Coordination with completion team to hand over all documentation.

Development of checking the MS and technological charts. Verification of instrumentation (check certificates, calibration, etc.). ACT verification of hidden works in accordance with the executive documentation of the project Checking the logs of work site operations Prepare and send report of completed and ongoing work to managers, make task list for the week or month. Provide weekly status of quality assurance documents/Acts as per each discipline.

• Development of Procedures and Plans for quality system inspections in accordance with customer requirements. • Selection of personnel of the quality department, their coordination and control over the implementation of tasks. • Setting tasks for inspectors, specialists, solving routine issues at the facility. • Monitor the timely production of certificates (hidden works, interim acceptance, etc.) and monitor the maintenance of logs filled in by the construction department in accordance with the regulatory acts of the Republic of Kazakhstan. • Monitor the availability of calibration certificates for all instruments and instruments within the company and contractors (if any). Keep records and send them to the Client on request. • Select a Laboratory or other contractors to conduct the necessary inspections and tests, organize their smooth operation on the site and issue timely reports. • Direct contact with the Customer's representatives on quality control issues, participation in meetings organized by the Customer and internal ones. • Informing the Project Manager about current problems at the facility. • Planning, Preparing, Conducting and reporting on internal audits. • Participation in external audits organized by the Customer and involvement of all divisions of the company.

• Responsible for the overall coordination, implementation, execution, control and completion of inspection related to specific projects, ensuring to meet the Client request and specification. • HSE assurance • Compliance with electrical codes and adherence to safety regulations • Quality assurance • Planning and implementation of project • Facilitate the definition of project scope • Goals and deliverables • Assigning work and training employees • Motivate employees to increase their productivity and meet work goals • Follow full scale project plans • Ensure the proper maintenance of equipment • Contribute to improved designs and manufacturing processes are other common job functions • Present reports defining project progress, problems and solutions

• Quality control of construction and installation works in accordance approved procedures and regulatory documents of the RK and the Customer. • Quality control of civil works Contracting and subcontracting companies. • Quality control of construction works: for reinforcement, concreting, quality control of concrete structures, laying of underground pipe in a trench, the construction of roads, backfilling, installation of metal structures, modular buildings, and plating a metal frame, concrete grout under the equipment, checking the compliance of the thickness of the layer of filling and methods of compaction. • Monitoring compliance with the quality of the soil. • Conducting lab tests for construction work. • Coordination among supervisors in terms of implementation of measures to pouring concrete and backfilling. • Compliance with technical regulations, construction norms and rules, technical conditions and technology of manufacturing operations. • Ensure project quality of work through a system of constant monitoring. • Acceptance of construction work. • Analysis of the information obtained at different stages of construction works, quality indicators, characterizing the work. • Application of measures to prevent the production of works that do not meet the requirements. • Participation in the work of the Commission on acceptance of construction objects and putting them into operation. • Conducting meetings with contractor and subcontractors in the resolution of production issues. • Verification of any of the inspected activities on the availability of the approved design drawing and schedule of inspections and tests (ITP) • Execution the planned inspections at the sites, per requests for inspection (RFI), marked in the relevant plan of inspection and tests (ITP). • Drafting and approval of inspection and test plan (ITP). • Verification of technical design documentation for compliance with regulatory law. • Check specifications for design, explanatory notes, drawings, design passports of projects for compliance with SNiP, GOST, rules, norms, regulations and other requirements applicable in the territory of RoK. • Preparation of general Construction Dossier of RoK (RoK Construction Dossier) as per Company’s contract: • Approval the list of acceptance documentation, construction dossierof RoK with General Contractor and Customer, Author's and Technical Supervision. Compilation of authorization documents (Statutory license, attestation, certificates for materials, orders for staff and etc.) • Maintaining the daily status in excel (progress of works) • Complying and delivery of acts, records, protocols on BCN 123-90, SNiP 3.05.07-85, SN of RoK 1.03-00-2011, EIC (Electrical Installation Code) of RoK or in any format. • Selection of documents in one file for submission to Customer

• Performing inspection of any activities for availability of approved work • drawings as well as for inspection and test plan (ITP) • Conduction of planned inspections on sites, according to requests for inspection (RFI), indicated in appropriate inspection and test plans (ITP). • Conduction of inspections on site as per official inspection and test request (ITR), submitted by contractor according to client procedures. • Through monitoring of various on-site activities to ensure work quality conformance with requirements, regulations, standards, specifications as well as conformance of work drawings. • Control of on-site installation work performance. • Analysis of conformance of supplied materials with project ones, identifying non-conformances. • LV and HV testing of cables, motors, transformers etc. in accordance with specifications, with compliance with safety instructions. • Making protocols and С0/С1/С2 checklists of performed E&I tests. • Creation of handover documentation after completion of construction and installation works on electric and instrumentation equipment and handover of documents to the client.

• Capital construction of industrial and civil objection a turnkey basis • Reconstruction and capital repair of special purpose, civil buildings and facilities • All types of earthworks • Implementation of all types of repairing and reconditioning works • Estate maintenance

• Control over the design estimates and technical standards documentation units. • Control of the used materials and equipment in the process production work. • Quality control for the implementation of civil works. • Quality control for installation of equipment. • Quality control testing and commissioning works for commissioning object. • Quality control of the executive management of documentation.

• Drawing up act • Control over the design estimates and technical standards documentation units. • Control of the used materials and equipment in the process production work. • Quality control for the implementation of civil works. • Quality control for installation of equipment. • Quality control testing and commissioning works for commissioning object. • Quality control of the executive management of documentation. • Documenting the technical supervision and technological support • Provide periodic reports in accordance with the quality.

• Management implementation of construction works for compliance with design documentation, Method Statement, work schedule and statutory and building regulations, rules; • Compliance control over work schedule/costs/work performance quality; • Management implementation of construction and erection works in order to comply with work performance quality, compliance with technical design specifications, standards and norms; • Provision of control and coordination of works on delivery of materials and products for compliance with work schedule and design requirements; • Provision of work execution for compliance with technical specifications and company procedures; • Control over work execution for compliance with company procedures in HSE; • Control over HSE instruction implementation and instruction log-keeping at the workplace; • Control over effective use of building machines, tools, transportation, materials on the construction site. • Application issuance for work execution, control over work execution time and completion; • Organizational management in order to arrange conditions for work execution. • Provision of tools and equipment’s, materials, PPE, framing scaffold, safety signs and other equipment’s to workers for safe work execution in compliance with company procedures; • Control over discipline and safety implementation in compliance with company procedure requirements.