Conducting welders' qualification tests based on approved WPS. Organizing and overseeing hydrostatic and pneumatic testing of pipelines and mechanical equipment. Conducting inspections before, during, and after welding to ensure high-quality standards. Analyzing welding processes and implementing corrective measures to enhance efficiency and quality. Preparing documentation in accordance with regulatory requirements and client specifications. Document control and conducting necessary tests to validate welding quality, including non-destructive testing (NDT).Collecting and analyzing data for the preparation of mechanical completion packages as per client requirements.Preparing technical documentation for equipment and conducting internal and external inspections of tanks and vessels.Conducting training sessions to enhance staff qualifications and introduce new working methods. Organizing and conducting meetings to address quality control issues and discuss current challenges Assigning inspectors to specific work areas and coordinating their activities to ensure effective quality control.

Quality control inspection of welding activities as per approved ITP's and specifications during pipeline of process work. • Perform in-process inspection's including material receiving, welder qualification, pipe alignment, visual inspection. • • Monitoring of welding parameters during welding. • Checking consumables as per approved weld procedure specification (WPS) • Checking consumable storage conditions ensuring correct temperature and humidity. • Checking WPS, PWHT, hardness testing, NDE. • Checking the relevant drawing. Confirm the correct welding procedure to be used, in conjunction with the line classes, and design weld size requirements. • • Checking the qualifications of the welder(s) allocated to this work. • Check welder has the correct consumables and that the electrodes have been correctly treated/stored. • Inspect weld fit-up and alignment are correct. • Check corrects preheat is applied. Monitoring essential variables during welding e.g., electrical characteristics preheat inter-pass temperature, etc. • • Final visual Inspection of welds.

Project: TCO FGP/WPMP Future Growth Project / Wellhead Pressure Management Project Greenfield: Drill Pad-20, DP-21, DP-22, DP-23, DP-24 (Gas Injection) Brownfield: MS-8, MS-9, MS-14, MS-15, MS-17, MS-21, MS-24, MS-26, MS-31, MS-33, MS-35 & Mid-Line Valve Station -23, MLVS-32, Main Manifold (MM), Korolev Metering Station (KMS), Crud Tank Farm (CTF LACT Meter), Korolev Let-Down Station (KLDS), Caspian Pipeline Consortium (CPC) The main purpose and responsibility for this position is to execute all SMP Systems Completion activities at sites for Brownfield & Greenfield (Field Facilities) to handover to the Field & HPLP CSU Operations Start-Up teams, 3GP PBF Operation and 3GI Operation Start-Up team, Maintenance and Reliability team. • • Weekly check tracker of RFI (Request for Information) and TEA (Technical Exception Authorization). Monitoring QVD (Quality Verification Document) progress in the MCPlus to ensure walkdowns are scheduled. • During these walkdowns, we check the Structural, Mechanical, Piping, and Pipeline systems to ensure that they follow safety standards and industry regulations. • Checking the system and subsystems during the walkdown or inspection in accordance with international standards (API, ASTM, ASME), RoK and TCO specifications and standards. • Participate in the Pre-Mechanical walkdown (Pre-MC), Final-Mechanical walkdown (FMC), Pre-Start-up Safety Review (PSSR) walkdown and Leak Testing () • Checking A-QVD, B-QVD, C-QVDs, RLMU, Punch List, Tag List and the latest edition of technical drawings using MC Plus & POL Coreworx, CMS, FED Systems to prepare and compile packages for RFSU WD. • Perform RFSU final walkdowns in pre-commissioning and commissioning areas with Operation departments, creating a punch list, and managing to close it out for smooth and seamless handover to Field & HPLP Operations, PBF Operation and 3GI Operation.

• There is understanding of Systems Completion & Turnover Process - Turnover Milestones, Turnover Certificates • FGP and TCO Procedures - Main Plant, Site Infrastructure Turnover Procedures, Turnover Dossier Procedure, Punch List Procedure etc. • FGP Turnover Strategies for the Infrastructure and Main Plant Facilities • FGP Construction Contracts Scope of Works • Commissioning Quality requirements, As-Built drawings, Mechanical Completion • Organize System walkdowns, Compile and validate Work to Go (WTG) lists • Key interface with Systems Completion, validate PLI for concise information prior to upload into MCPlus. • General understanding of the MCPlus system and support the Turnover Team to ensure accurate. • Interaction with the Project Construction, Turnover Coordinators and Walk Down Engineers to support Walk Down Engineer in organizing walk downs based on Contractor MC Notifications and project schedule. • Supports MCPlus team by providing approved Final Construction Punch List to make sure the final punch list items and their status are accurate in the MCPlus system. • Provide that relevant punch lists of the Final Construction are available along with other punch list requirements as noted in the Punch List procedure. • Present at the a pre-walk down meeting to ensure all participants understand the punch list requirements as detailed in the Punch List procedure. • Present at the a post walk down meeting following the completion of the walk down to ensure all identified items are finalized, registered and categorized in accordance with the Punch List procedure • Experience in MCPlus database usage to determine status and expedite closure of check sheets and punchlist items

- Witness and inspection both fabrication and site activities ensuring that project specifications are built to requirements. - Conduct daily inspection, monitoring and surveillance activities both fabrication and site which involves safety, piping activities, material and equipment preservation, proper implementation of approved welding procedures and specification is being carried out to jobsite. - Coordinate to NDT subcontractor regarding RT joint, MT/PT joint, UT joint and PWHT joint. Witness hardness test execution, positive material inspection, penetrant test and magnetic particle inspection. - Review and conduct line check inspection to ensure it comply both Engineering and Quality requirements, prepare punch list, punch list clearing on test package issued to subcontractor prior to release for testing. - Witness and inspection hydro testing and pneumatic test inspection to ensure that all requirements are meet the project specification standards. - Witness and inspection reinstatement and close out activities of piping systems after completion of test as per approved drawings, specification and commissioning requirements. - Witness and inspection reinstatement and close out activities of piping systems after completion of test as per approved drawings, specification and commissioning requirements. Conduct final inspection for system mechanical completion certificate for system completeness and prepare punch list for those did not comply with company requirement and final verification upon correction for final approval

Object: 3GP Main substation 52-SU-3301 project 607, 3GI substation 47A & 47B, South substation project 580 - Quality control of welding operations according to the procedures of the Customer. Inspections, incomplete and completed works, installation works and tests to ensure compliance with design specifications (SNiP, VSN, API, ASME) and drawings. - Daily interaction with the Construction Supervisor and monitoring to determine needs, organization of all necessary inspections. Work with supervision and technical supervision of the Customer. - Ensuring the compilation and issuance of reports of non-compliance and verification to identify and eliminate non-compliance identified during construction. - Taking an active part in the implementation of a safe work culture on the project, making safety procedures an integral part of any work performed. - Quality control of construction and installation works, welding and installation works, compliance with technical regulations, building codes and standards, technical conditions and production technology, quality of materials and products, their compliance with established requirements. - Monitoring, viewing and checking records on the quality of welding, statistics and reporting related to welding. - Monitoring the process of tightening bolted joints. - Carrying out incoming control, to monitor the storage conditions of welding materials. Check the delivery of welding consumables and their correct accounting. Fixing the opening time of the package, recording storage logs, checking the control of temperature and relative humidity.

Object: Performed work on Turnaround-2018 at the KTL-2 plant. Well T-5654, T-5842, T-4838, Turnaround-2019 at the KTL-1 plant. - Control of preparation of production works. - Quality control of welding operations in accordance with the procedures of the Customer. - Control of production of pipe units of process pipelines according to isometric drawings during galvanic works in the shop. - Visual inspection of welded joints of argon-arc welding (GTAW), manual arc welding (SMAW) and combined welding GTAW / SMAW. - Control of hydrostatic testing of process pipelines in accordance with the technical characteristics of TCO. - Control over the processes of assembling flange connections, installing valves and tightening the studs of flange connections in accordance with the technical characteristics of TCO. - Preparation of reception documentation for quality control. - Monitor the storage conditions for welding consumables. Check the supply of welding materials and their proper recording. Fixing the time of opening the package, recording the logs of storage, checking the control of temperature and relative humidity. - Check the welding procedures to prepare the ends of the pipes. To control the chamfer and the heating temperature, welding parameters and speed in accordance with the approved procedure. - Check the visual inspection of pipe collection and root welding. - Compliance with TBiT regulations during production. - Get explanations and explain to the incumbent personnel their violations. Participate in the constant training of personnel. Prepare training materials and trainings for welders. - Participate in the certification of welding procedures and certification of welders. - Working with the author's supervision and technical control of the Customer. - Control of the timetable for timely assembly and welding. - Creation of reports on the quality of the work performed. - Control with welding laboratory (control, photos, reports) - Certification of equipment and welding materials. - Welding magazine on the program MaxTrax. - Control over timely and quality performance of works by the Contractor.

Object: Customer ''ISKER Group'' Orken construction project Dormitory for 5000 people - To control quality of installation and construction works, observance of technical regulations, construction norms and rules, specifications and production technology of works, materials and products qualities, their compliances to be established requirements - Control of technology and terms of performance of the all construction works performed - To study the reasons causing deterioration of construction works, to participate in development of actions for their elimination - Organization and control of earth and concrete works, preparation of the basis, backfilling - Monitoring of pipeline activities: trench excavation, backfill operations - To assist in the compilation of document hand over packages